Here's a summary of the information provided in the document, broken down into categories:

1. Product Description:

️· Product: Heat Sink (specifically, model ATS-XXXX - the exact model number isn't fully visible, but appears to start with "ATS-")
️· Manufacturer: Advanced Thermal Solutions, Inc. (ATS)

2. Technical Specifications (for ATS-XXXX):

️· Dimensions: 60mm x 60mm (likely square or close to it)
️· Fin Type: "Superfine" (implied - likely refers to a very dense arrangement of fins)
️· Material: Not explicitly stated, but typical for heat sinks is aluminum or copper.
️· Thermal Performance: (See "Thermal Data" section below)

3. Thermal Data:

️· Airflow:
- 0.5 m/s - Thermal Resistance: 3.5°C/W
- 1.0 m/s - Thermal Resistance: 2.6°C/W
- 2.0 m/s - Thermal Resistance: 2.1°C/W

️· Note: These are likely *static* thermal resistance values. Dynamic values would be affected by factors like heat spreader contact resistance.

4. Contact Information:

️· Address: 89-27 Access Road, Norwood, MA 02062 USA
️· Phone: (781) 769-2800
️· Fax: (781) 769-9979
️· Website: [www.qats.com](http://www.qats.com)

5. Document Information:

️· Revision: R2-0917 (indicates a revision date of September 2017)



Important Considerations:

️· Missing Model Number: The complete model number (beyond "ATS-") is cut off in the image. This would be necessary for a complete understanding of the heat sink's specifics.
️· Assumptions: Some aspects are inferred based on typical heat sink design.