1. General Information

️· Company: Advanced Thermal Solutions, Inc.
️· Address: 89-27 Access Road, Norwood, MA 02062 USA
️· Contact:
- Phone: 781.769.2800
- Fax: 781.769.9979
️· Website: [www.qats.com](http://www.qats.com)
️· Document Revision: R2-0817 (Indicates a revision date of August 17th, 20XX)

2. Product Description (Based on context - likely a Heat Sink)

️· Part Number (Example): ATS-XXXX (Not explicitly stated, but implied. The "ATS" prefix is consistent.)
️· Type: Heat Sink (The document pertains to thermal management.)
️· Features/Capabilities (From descriptions):
- Designed for thermal management applications.
- RoHS-6 compliant (Restricts the use of certain hazardous substances).
- REACH compliant (Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals).

3. Dimensions & Specifications (Specifics depend on the part number, but general concepts are mentioned)

️· Dimension A: Length of the heat sink (referenced in notes)
️· Dimension B: Width of the heat sink (referenced in notes)
️· Dimension C: Height of the heat sink (referenced in notes, measured from the base to the top of the fins)
️· Dimension E: Distance between holes perpendicular to the direction of flow (likely for mounting)
️· Dimension F: Distance between holes in the direction of flow (likely for mounting)
️· Thermal Performance Data: Provided as reference only, subject to variation.

4. Important Notes & Disclaimers

️· Thermal Performance Variation: The thermal data provided is for reference only, and actual performance may vary.
️· Design Changes: ATS reserves the right to update or change its products without notice.
️· Contact for Technical Information: Advanced Thermal Solutions, Inc. should be contacted for more technical details.
️· Mounting: The dimension "E" and "F" are important for mounting the heat sink.

In essence, the document is a datasheet or product specification sheet for a heat sink manufactured by Advanced Thermal Solutions. It outlines contact information, general product details, key dimensions, and compliance information.