1. Product Description:

️· Type: Heat sink. Specifically, it's described as part of a thermal management solution.
️· Manufacturer: Advanced Thermal Solutions, Inc. (ATS)
️· Part Number/Identifier: The example part shown is "ATS".
️· Features:
- Designed for thermal management.
- Available in both "undirected" and "directed" configurations.
- Includes push pins for easy mounting.
- "No-clean" thermal interface material (TIM) is used in some models.

2. Technical Specifications (Based on Example Part - ATS):

️· Dimensions (from the "NOTES" section - though potentially repeated throughout):
- Dimension A (Length): Not explicitly stated, but noted as the length in the direction of flow.
- Dimension B (Width): Not explicitly stated, but noted as the width of the heat sink.
- Dimension C (Height): Not explicitly stated, but noted as the height from the base to the fin top.
- Dimension E (Hole Spacing): Not explicitly stated
- Dimension F (Hole Spacing): Not explicitly stated
️· Material: Primarily aluminum (likely).
️· Fin Design: Not described in detail, but is a core element of the heat dissipation.
️· Mounting: Uses push pins.

3. Contact Information:

️· Address: 89-27 Access Road, Norwood, MA 02062 USA
️· Phone: 781.769.2800
️· Fax: 781.769.9979
️· Website: [www.qats.com](http://www.qats.com)

4. Important Notes/Disclaimers:

️· "No-clean" TIM means less cleaning required after application (a benefit).
️· The information is subject to change; contact ATS for the latest data.
️· The technical information provided is intended for reference only.

5. Document Revision:

️· Revision: R2-0917 (September 2017)