# TS3USB30

## HIGH-SPEED USB 2.0 (480-Mbps) 1:2 MULTIPLEXER/DEMULTIPLEXER SWITCH

FEATURES
· VCC Operation at 3 V and 4.3 V
· 1.8-V Compatible Control-Pin Inputs
· Supports Partial Power-Down-Mode Operation
· ron = 10 Ω Max
· Δron <0.35 Ω Typ
· Cio(ON) = 7 pF Typ
· Low Power Consumption (1 µA Max)
· ESD Performance Tested Per JESD 22
· –3-dB Bandwidth = 955 MHz Typ
· Packaged in 10-pin TQFN (1.4 mm × 1.8 mm)

APPLICATIONS
· Routes Signals for USB 1.0, 1.1, and 2.0
· Mobile Industry Processor Interface (MIPI) Signal Routing

DESCRIPTION
The TS3USB30 is a high-bandwidth switch designed for high-speed USB 2.0 signals. It multiplexes differential outputs from a USB host to one of two outputs, offering little attenuation and low bit-to-bit skew.

TRUTH TABLE
· Disconnect (OE = H)
· D = D1 (S = L, OE = L)
· D = D2 (S = H, OE = L)

ABSOLUTE MAXIMUM RATINGS
· VCC: -0.5 to 7 V
· Input Voltage (VIN): -0.5 to 7 V
· Switch I/O Voltage: -0.5 to VCC + 0.3 V
· Current (IIK): -50 mA
· Current (II/OK): -50 mA
· Continuous current through VCC/GND: ±100 mA

RECOMMENDED OPERATING CONDITIONS
· VCC: 3 to 4.3 V
· Operating temperature: -40 to 85 °C

ELECTRICAL CHARACTERISTICS
· ON-State Resistance (ron): 10 Ω Max
· OFF-State Leakage: ±2 µA

DYNAMIC CHARACTERISTICS
· Propagation Delay: 0.25 ns
· Bandwidth (-3dB): 955 MHz

PACKAGING
· Package Type: QFN
· Pin Count: 10
· Tape and Reel Quantity: 3000
· Reel Diameter: 179 mm