1. Product Series & Description:

️· Series: US2AF, US2BF, US2DF, US2GF, US2JF, US2KF, US2MF. These are likely rectifier diodes.
️· Type: Axial lead diodes. (Based on the mention of axial leads and the overall product style.)
️· Key Features:
- Low forward voltage drop
- High current capability
- Reliability
- Suitable for resistive and inductive loads.
- Available in both normal and Pb-free options.

2. Electrical Characteristics (Typical Values – See Table)

*The following data is a summarized version of the table, as the complete table is quite extensive.*

Parameter	US2AF	US2BF	US2DF	US2GF	US2JF	US2KF	US2MF	Unit
Maximum Recurrent Peak Reverse Voltage	50	100	200	400	600	800	1000	V
Maximum RMS Voltage	50	100	200	400	600	800	1000	V
Maximum DC Blocking Voltage	50	100	200	400	600	800	1000	V
Maximum Average Forward Rectified Current	2.0	2.0	2.0	2.0	2.0	2.0	2.0	A
Peak Forward Surge Current (8.3ms)	60	60	60	60	60	60	60	A
Max Instantaneous Forward Voltage (at 2.0A)	1.0	1.0	1.0	1.0	1.0	1.0	1.0	V
Max DC Reverse Current (Ta=25°C)	15	15	15	15	15	15	15	µA
Max Reverse Recovery Time								nS
Typical Junction Capacitance								pF

3. Environmental & Physical Characteristics:

️· Operating Temperature Range: -65°C to +150°C.
️· Package: Axial lead
️· Dimensions (in inches and millimeters): Refer to the drawing provided (0.128 to 0.189 for various dimensions; detailed measurements listed in the original text).
️· Lead Material: Not explicitly stated, but likely a standard lead alloy.

4. Notes & Additional Information:

️· Derating for Capacitive Loads: Current should be reduced by 20% when used with capacitive loads.
️· Forward Surge Current: The peak forward surge current is specified for an 8.3ms single-half sine-wave pulse superimposed on the rated load, according to the JEDEC method.
️· Typical Junction Capacitance and Reverse Recovery Time These values are not specifically quantified in the provided text, but are noted as being measured under specific conditions.
️· Measurement conditions: Junction Capacitance measured at 1 MHz, with a reverse voltage of 4.0 V.