1. Product(s) Covered:

️· SRF0504 Series - Line Filter: Mentioned in the recommended layout section.
️· CM322522 Series - Chip Inductor: The primary focus of the document.

2. Key Specifications & Characteristics (CM322522 Series):

️· Inductor Type: Chip Inductor
️· RoHS Compliance: Complies with RoHS Directive 2002/95/EC and RoHS Recast 2011/65/EU.
️· Tolerance: Standard or other (M = ±20%, K = ±10%, J = ±5%)
️· Packaging:
- QTY: 2000 pieces per reel.
- Leader: 200
- Components: (Main body of the reel containing components)
- Trailer: 160
- No component (blank) sections are included.
- Dimensions: Approximately 178mm (width), 12.5mm (height) and 4.0 x 4.0mm in other specifications

3. Electrical Specifications (Based on Table):

The table at the bottom of the document provides a series of inductor values and associated specifications. Here's a breakdown of the parameters listed:

Inductance (µH)	Standard Tolerance	Other Tolerance	SRF (kHz)	DC Resistance (Ω)	Saturation Current (A)
0.56	±10%		35	0.048	3.0
1.0	±10%		28	0.050	2.8
1.5	±10%		25	0.055	2.5
2.2	±10%		23	0.060	2.3
3.3	±10%		22	0.065	2.1
4.7	±10%		21	0.070	2.0
6.8	±10%		20	0.075	1.9
8.2	±10%		19	0.080	1.8
10	±10%		18	0.085	1.7
12	±10%		17	0.090	1.6
15	±10%		16	0.10	1.5
18	±10%		15	0.11	1.4
22	±10%		14	0.12	1.3
27	±10%		13	0.13	1.2
33	±10%		12	0.14	1.1
39	±10%		11	0.15	1.0
47	±10%		10	0.16	0.9
56	±10%		9	0.17	0.8
68	±10%		8	0.18	0.7
82	±10%		7	0.19	0.6
100	±10%		6	0.20	0.5
120	±10%		5	0.21	0.4
150	±10%		4	0.22	0.35
180	±10%		3	0.23	0.3
220	±10%		3	0.24	0.28
270	±10%		2	0.25	0.25
330	±10%		1	0.26	0.22
390	±10%		1	0.27	0.20
470	±10%		0.8	0.28	0.18
560	±10%		0.7	0.29	0.16
680	±10%		0.6	0.30	0.14
820	±10%		0.5	0.31	0.12
1000	±10%		0.4	0.32	0.10

4. Other Important Information:

️· Self-Resonant Frequency (SRF): Specified in kHz for each inductance value.
️· DC Resistance: Specified in Ohms.
️· Saturation Current: Specified in Amps. (This is a crucial parameter; exceeding this value can significantly degrade inductor performance.)
️· Soldering Profile: A detailed soldering profile chart is provided, specifying temperature and time constraints for reflow soldering.
️· Recommended Layout: Diagrams illustrating recommended PCB layout patterns.
️· Packaging Specifications: Detailed diagram and dimensions for the reel packaging.

Important Notes:

️· Disclaimer: "Specifications are subject to change without notice." Users are advised to verify the latest specifications with the manufacturer.
️· Application Variability: "Device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time."