| Manufacturer | Part # | Datasheet | Description |

Texas Instruments
|
UCC3895EVM |
1Mb/19P |
Using the UCC3895 in a Direct Control Driven Synchronous Rectifier Applications |

Cymbet Corporation
|
AN-1025 |
695Kb/8P |
Using the EnerChip??in Pulse Current Applications |

STMicroelectronics
|
AN2421 |
79Kb/6P |
Using the STMPE801 as a keypad controller |

Silicon Laboratories
|
AN123 |
258Kb/16P |
USING THE DAC AS A FUNCTION GENERATOR |

STMicroelectronics
|
AN3260 |
324Kb/24P |
Building a thermometer using the STM8S-DISCOVERY |
| AN3123 |
224Kb/30P |
Using the UART interfaces in the SPEAr embedded MPU family |
| AN3161 |
761Kb/14P |
Using the STGW35HF60WD advanced PT IGBT in parallel |

Cymbet Corporation
|
AN-1036 |
674Kb/7P |
Using the EnerChip CC in Energy Harvesting Designs |

STMicroelectronics
|
AN2167 |
59Kb/5P |
Using the STPM01 with a shunt current sensor |
| AN2979 |
294Kb/12P |
Implementing a simple ADC using the STM8L101xx comparator |
| AN4478 |
263Kb/9P |
Using multiple VL6180Xs in a single design |

Tyco Electronics
|
408-10096 |
511Kb/2P |
Using a 5mm hex wrench, install the mounting bracket on the servo terminator as shown in Figure 2. |

Silicon Laboratories
|
AN313 |
120Kb/6P |
USING THE Si3400 AND Si3401 IN HIGH POWER APPLICATIONS |

STMicroelectronics
|
X-CUBE-IAP-USART |
115Kb/3P |
STM32Cube in-application programming using the USART embedded software May 2015 |
| AN2319 |
70Kb/8P |
Using the 64-bit UID in contactless RFID applications |

Texas Instruments
|
SNOA565 |
1Mb/13P |
AN-2177 Using the LMH6554 as a ADC Driver |

STMicroelectronics
|
AN3259 |
334Kb/25P |
RS232 communications with a terminal using the STM8S-DISCOVERY |
| AN4174 |
2Mb/21P |
Using the SPIRIT1 transceiver under the ARIB STD-T67 standard in the 426 MHz band |

Motorola, Inc
|
EB311 |
331Kb/16P |
In-Circuit Programming of FLASH Memory Using the Monitor Mode for the MC68HC908SR12 |

STMicroelectronics
|
AN4133 |
1Mb/35P |
Using the SPIRIT1 transceiver under ARIB STD-T108 in the 920 MHz band |