Features
• DLA SMD 5962-13220
• Input supply range 4.0V to 13.2V
• Output current up to 1.5A at TJ = +150°C
• Best in class accuracy ±1.5%
- Over line, load, and temperature
• Ultra low dropout:
- 75mV dropout (typical) at 0.5A
- 225mV dropout (typical) at 1.5A
• Noise of 100μVRMS (typical) between 300Hz to 300kHz
• SET mitigation with no added filtering/diodes
• Shutdown current of 165μA (typical)
• Externally adjustable output voltage
• PSRR 65dB (typical) at 1kHz
• ENable and PGood feature
• Programmable soft-start/inrush current limiting
• Adjustable overcurrent protection
• Over-temperature shutdown
• Stable with 47μF minimum tantalum capacitor
• Radiation acceptance testing - ISL75052SEH
- High dose rate (50-300rad(Si)/s). . . . . . . . . . . 100krad(Si)
- Low dose rate (0.01rad(Si)/s) . . . . . . . . . . . . . . .50krad(Si)
• Radiation acceptance testing - ISL73052SEH
- Low dose rate (0.01rad(Si)/s) . . . . . . . . . . . . . . .50krad(Si)
• SEE hardness (see SEE report for details)
- No SEB/SEL LETTH. . . . . . . . . . . . . . . . . . .86MeV•cm2/mg
- SET (VOUT within ±5% During Events) . .86MeV•cm2/mg