STM32MP153C datasheet(163/254 Pages) STMICROELECTRONICS

Part #	STM32MP153C

Description	Arm® dual Cortex®-A7 800 MHz Cortex®-M4 MPU, TFT, 37 comm. interfaces, 29 timers, adv. analog, crypto

PDF	254 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

163 / 254 page

DS12503 Rev 3

163/254

STM32MP153C/F

Electrical characteristics

233

Figure 23. VIL/VIH for FT I/Os

Output driving current

The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA, and sink or

source up to ±20 mA (with a relaxed VOL/VOH).

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 6.2. In particular:

•

The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run mode

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

∑IVDD (see Table 11).

•

The sum of the currents sunk by all the I/Os on VSS plus the maximum Run mode

consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating

∑IVSS (see Table 11).

Output voltage levels

Unless otherwise specified, the parameters given in Table 51 are derived from tests

performed under ambient temperature and VDD supply voltage conditions summarized in

Table 13: General operating conditions. All I/Os are CMOS and TTL compliant.

STM32MP153C Datasheet(PDF) 163 Page - STMicroelectronics