93

G6K

G6K

Note:

The above values are initial values.

Note:

1. The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method.

2. Values in parentheses are actual values.

3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking

the dielectric strength.

4. This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50

Ω. This

value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under

actual operating conditions.

Load

Resistive load

Rated load

0.3 A at 125 VAC; 1 A at 30 VDC

Rated carry current

1 A

Max. switching voltage

125 VAC, 60 VDC

Max. switching current

1 A

Item

Single-side stable models (double-pole)

Single-winding latching

model

G6K-2F, G6K-2G, G6K-2P

G6K-2F-Y, G6K-2G-Y,

G6K-2P-Y

G6KU-2F-Y, G6KU-2G-Y,

G6KU-2P-Y

Contact resistance (See note 1.)

100 m

Ω max.

Operating (set) time (See note 2.)

3 ms max. (approx. 1.4 ms)

3 ms max. (approx. 1.2 ms)

Release (reset) time (See note 2.)

3 ms max. (approx. 1.3 ms)

3 ms max. (approx. 1.2 ms)

Insulation resistance (See note 3.)

1,000 M

Ω min. (at 500 VDC)

Dielectric

strength

Coil and contacts

1,500 VAC, 50/60 Hz for 1 min

Contacts of different

polarity

1,000 VAC, 50/60 Hz for 1 min

Contacts of same po-

larity

750 VAC, 50/60 Hz for 1 min

Impulse

withstand

voltage

Coil and contacts

1,500 V (10 x 160 µs)

2,500 V (2 x 10 µs), 1,500 V (10 x 160 µs)

Contacts of different

polarity

1,500 V (10 x 160 µs)

Contacts of same po-

larity

Vibration resistance

Destruction: 10 to 55 Hz, 2.5-mm single amplitude (5-mm double amplitude) and 55 to 500 Hz,

Malfunction: 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) and 55 to 500 Hz,

Shock resistance

Endurance

Mechanical: 50,000,000 operations min. (at 36,000 operations/hour)

Electrical: 100,000 operations min. (with a rated load at 1,800 operations/hour)

Failure rate (P level) (See note 4.)

10 µA at 10 mVDC

Ambient temperature

Operating:

−40°C to 70°C (with no icing or condensation)

Ambient humidity

Operating: 5% to 85%

Weight

Approx. 0.7 g