ST72260G datasheet(112/171 Pages) STMICROELECTRONICS

112 / 171 page

ST72260G, ST72262G, ST72264G

112/171

11.7 10-BIT A/D CONVERTER (ADC)

11.7.1 Introduction

The on-chip Analog to Digital Converter (ADC) pe-

ripheral is a 10-bit, successive approximation con-

verter with internal sample and hold circuitry. This

peripheral has 6 multiplexed analog input chan-

nels (refer to device pin out description) that allow

the peripheral to convert the analog voltage levels

from 6 different sources.

The result of the conversion is stored in a 10-bit

Data Register. The A/D converter is controlled

through a Control/Status Register.

11.7.2 Main Features

10-bit conversion

6 channels with multiplexed input

Linear successive approximation

Data register (DR) which contains the results

Conversion complete status flag

On/off bit (to reduce consumption)

The block diagram is shown in Figure 61.

11.7.3 Functional Description

11.7.3.1 Analog Power Supply

VDDA and VSSA are the high and low level refer-

ence voltage pins. In some devices (refer to device

pin out description) they are internally connected

to the VDD and VSS pins.

Conversion accuracy may therefore be impacted

by voltage drops and noise in the event of heavily

loaded or badly decoupled power supply lines.

Figure 61. ADC Block Diagram

CH2

CH1

EOC SPEED ADON SLOW

CH0

ADCCSR

AIN0

AIN1

ANALOG TO DIGITAL

CONVERTER

AINx

ANALOG

MUX

ADCDRH

fADC

fCPU

ADCDRL

fCPU, fCPU/2, fCPU/4

ST72260G Datasheet(PDF) 112 Page - STMicroelectronics

ST72260G Datasheet(HTML) 112 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL