HD6432351 datasheet(568/1025 Pages) RENESAS

568 / 1025 page

Section 12 Watchdog Timer (WDT)

Rev. 3.00 Sep 15, 2006 page 534 of 988

REJ09B0330-0300

12.2

12.2.1

Timer Counter (TCNT)

R/W

Bit

Initial value

R/W

TCNT is an 8-bit readable/writable* up-counter.

When the TME bit is set to 1 in TCSR, TCNT starts counting pulses generated from the internal

clock source selected by bits CKS2 to CKS0 in TCSR. When the count overflows (changes from

H'FF to H'00), either the watchdog timer overflow signal (

WDTOVF) or an interval timer interrupt

(WOVI) is generated, depending on the mode selected by the WT/

IT bit in TCSR.

TCNT is initialized to H'00 by a reset, in hardware standby mode, or when the TME bit is cleared

to 0. It is not initialized in software standby mode.

Note: * TCNT is write-protected by a password to prevent accidental overwriting. For details

see section 12.2.4, Notes on Register Access.

12.2.2

Timer Control/Status Register (TCSR)

OVF

R/(W)*

WT/

R/W

TME

R/W

—

CKS0

R/W

CKS2

R/W

CKS1

R/W

Bit

Initial value

R/W

Note: * Can only be written with 0 for flag clearing.

TCSR is an 8-bit readable/writable* register. Its functions include selecting the clock source to be

input to TCNT, and the timer mode.

TCR is initialized to H'18 by a reset and in hardware standby mode. It is not initialized in software

standby mode.

Note: * TCSR is write-protected by a password to prevent accidental overwriting. For details

see section 12.2.4, Notes on Register Access.

HD6432351 Datasheet(PDF) 568 Page - Renesas Technology Corp

HD6432351 Datasheet(HTML) 568 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL