PIC12F752 datasheet(121/204 Pages) MICROCHIP

121 / 204 page

 2011 Microchip Technology Inc.

Preliminary

DS41576A-page 121

PIC12F752/HV752

15.10 Analog Input Connection

Considerations

A simplified circuit for an analog input is shown in

Figure 15-3. Since the analog input pins share their

connection with a digital input, they have reverse

biased ESD protection diodes to VDD and VSS. The

analog input, therefore, must be between VSS and VDD.

If the input voltage deviates from this range by more

than 0.6V in either direction, one of the diodes is for-

ward biased and a latch-up may occur.

A maximum source impedance of 10 k

 is recommended

for the analog sources. Also, any external component

connected to an analog input pin, such as a capacitor or

a Zener diode, should have very little leakage current to

minimize inaccuracies introduced.

FIGURE 15-3:

ANALOG INPUT MODEL

Note 1: When reading a PORT register, all pins

configured as analog inputs will read as a

‘0’. Pins configured as digital inputs will

convert as an analog input, according to

the input specification.

2: Analog levels on any pin defined as a

digital input, may cause the input buffer to

consume more current than is specified.

Rs < 10K

CPIN

5 pF

VDD

 0.6V

RIC

ILEAKAGE(1)

Vss

Legend: CPIN

= Input Capacitance

ILEAKAGE = Leakage Current at the pin due to various junctions

RIC

= Interconnect Resistance

= Source Impedance

= Analog Voltage

= Threshold Voltage

To Comparator

Note 1:

See Section 20.0 “Electrical Specifications”

Analog

Input

PIC12F752 Datasheet(PDF) 121 Page - Microchip Technology

PIC12F752 Datasheet(HTML) 121 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL