DSPIC33FJMC202ESS datasheet(239/330 Pages) MICROCHIP

239 / 330 page

DS70283K-page 239

dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304

IIL

Input Leakage Current(2,3)

DI50

I/O Pins 5V Tolerant(4)

——

±2

μAVSS ≤VPIN ≤VDD,

Pin at high-impedance

DI51

I/O Pins Not 5V Tolerant(4)

——

±1

μAVSS ≤VPIN ≤VDD,

Pin at high-impedance,

-40°C

≤TA ≤+85°C

DI51a

I/O Pins Not 5V Tolerant(4)

——

±2

μA

Shared with external refer-

ence pins, -40°C

≤TA

≤+85°C

DI51b

I/O Pins Not 5V Tolerant(4)

——

±3.5

μAVSS ≤VPIN ≤VDD, Pin at

high-impedance,

-40°C

≤TA ≤+125°C

DI51c

I/O Pins Not 5V Tolerant(4)

——

±8

μA

Analog pins shared with

external reference pins,

-40°C

≤TA ≤+125°C

DI55

MCLR

——

±2

μAVSS ≤VPIN ≤VDD

DI56

OSC1

—

±2

μAVSS ≤VPIN ≤VDD,

XT and HS modes

TABLE 24-9:

DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS (CONTINUED)

DC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature

-40°C

≤TA ≤+85°C for Industrial

-40°C

≤TA ≤+125°C for Extended

Param

No.

Symbol

Characteristic

Min

Typ(1)

Max

Units

Conditions

Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as current sourced by the pin.

4: See “Pin Diagrams” for a list of digital-only and analog pins.

5: VIL source < (VSS – 0.3). Characterized but not tested.

6: Non-5V tolerant pins VIH source > (VDD + 0.3), 5V tolerant pins VIH source > 5.5V. Characterized but not

tested.

7: Digital 5V tolerant pins cannot tolerate any “positive” input injection current from input sources > 5.5V.

8: Injection currents > | 0 | can affect the ADC results by approximately 4-6 counts.

9: Any number and/or combination of I/O pins not excluded under IICL or IICH conditions are permitted pro-

vided the mathematical “absolute instantaneous” sum of the input injection currents from all pins do not

exceed the specified limit. Characterized but not tested.

DSPIC33FJMC202ESS Datasheet(PDF) 239 Page - Microchip Technology

DSPIC33FJMC202ESS Datasheet(HTML) 239 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL