| Electronic Components Datasheet Search |
|
ST92185B Datasheet(PDF) 124 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST92185B Datasheet(HTML) 124 Page - STMicroelectronics |
|
124 / 178 page ![]() 124/178 ST92185B - ON SCREEN DISPLAY (OSD) ON SCREEN DISPLAY (Cont’d) NATIONAL CHARACTER SET REGISTER (NCSR) R245 - Read/Write Register Page: 32 Reset Value: 0000 0000 (00h) The register bit values are sampled and then acti- vated only at each field start (on Vsync pulse). Bit 7 = TSLE: Translucency/Half-Tone Output En- able bit. 0: Translucency/Half-Tone signal disabled 1: Translucency/Half-Tone is enabled. Translu- cency or Half-Tone realtime control signal is routed in the TSLU/HT pin (depending on the HTC bit in the FSCCR register). Note: Translucent display depends also on the BE, TIO and MM bits, see Table 11. Bit 6 = Reserved. Bit 5 = SWE: G0 Switch Enable Control Bit. In case of a multiple G0 alphabet configuration (NCM=1), this bit allows to switch from a first to a second predefined G0 alphabet, using a single se- rial attribute (1Bh). In case of a single G0 alphabet configuration (NCM=0), the SWE bit will have no effect. If SWE is reset, the used G0 alphabet is pointed through NC[1:0]. If SWE is set, the used G0 alphabet is pointed through NC[3:2] and NC[1:0] toggled by 1Bh serial attribute. Bit 4 = NCM: National Character Mode control bit. This bit reconfigures a part of the font set as defin- ing: – either a single G0 alphabet with up to 15 national sub-sets, – or 3 different G0 alphabets. If NCM is reset, a single G0 alphabet configuration is activated and the 15 national sub-sets are se- lected through the NC[3:0] bits. If NCM is set, a triple G0 alphabet configuration is activated, the selection of the G0 set used for the display is done through either NC[3:2] or NC[1:0] bits, depending upon the SWE control bit and the serial attribute 1Bh values. Bit 3:0 = NC[3:0]: National Character Set Selec- tion. If the NCM bit is reset, these bits define which na- tional sub-set has to be used to complete the basic currently used G0 alphabet set. If the NCM is set, these bits define which G0 is used. Figure 81. National Characters Selection 70 TSLE 0 SWE NCM NC3 NC2 NC1 NC0 NCM SWE NC[3:0] G0-0 G0-1 G0-2 G0-0 G0-1 G0-2 G0-0 G0-1 G0-2 SERIAL ATTR. 1Bh NC[1:0] NC[3:2] NC[1:0] TOGGLE NS0 NS1 NS14 15 NATIONAL CHAR. SETS 3 G0 SETS 0 0 1 1 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |