STM32F303VC datasheet(139/148 Pages) STMICROELECTRONICS

139 / 148 page

DocID023353 Rev 13

139/148

STM32F303xB STM32F303xC

Package information

141

7.5.2

Selecting the product temperature range

When ordering the microcontroller, the temperature range is specified in the ordering

information scheme shown in Section 8: Ordering information.

Each temperature range suffix corresponds to a specific guaranteed ambient temperature at

maximum dissipation and, to a specific maximum junction temperature.

As applications do not commonly use the STM32F303xB/STM32F303xC at maximum

dissipation, it is useful to calculate the exact power consumption and junction temperature

to determine which temperature range will be best suited to the application.

The following examples show how to calculate the temperature range needed for a given

application.

Example 1: High-performance application

Assuming the following application conditions:

Maximum ambient temperature TAmax = 82 °C (measured according to JESD51-2),

IDDmax = 50 mA, VDD = 3.5 V, maximum 3 I/Os used at the same time in output at low

level with IOL = 8 mA, VOL= 0.4 V and maximum 2 I/Os used at the same time in output

at low level with IOL = 20 mA, VOL= 1.3 V

PINTmax = 50 mA × 3.5 V= 175 mW

PIOmax = 3 × 8 mA × 0.4 V + 2 × 20 mA × 1.3 V = 61.6 mW

This gives: PINTmax = 175 mW and PIOmax = 61.6 mW:

PDmax = 175 + 61.6 = 236.6 mW

Thus: PDmax = 236.6 mW

Using the values obtained in Table 86 TJmax is calculated as follows:

–

For LQFP64, 45°C/W

TJmax = 82 °C + (45°C/W × 236.6 mW) = 82 °C + 10.65 °C = 92.65 °C

This is within the range of the suffix 6 version parts (–40 < TJ < 105 °C).

In this case, parts must be ordered at least with the temperature range suffix 6 (see

Section 8: Ordering information).

STM32F303VC Datasheet(PDF) 139 Page - STMicroelectronics