STM32L053C6 datasheet(126/132 Pages) STMICROELECTRONICS

126 / 132 page

Revision history

STM32L053x6 STM32L053x8

126/132

DocID025844 Rev 7

Revision history

Table 87. Document revision history

Date

Revision

Changes

07-Feb-2014

Initial release.

29-Apr-2014

Updated Table 4: Functionalities depending on the working mode (from

Run/active down to standby). Added Section 3.2: Interconnect matrix.

Updated Figure 4: STM32L053x6/8 TFBGA64 ballout - 5x 5 mm.

Added VREF_OUT additional function to PB0 and PB1, replaced TTa

I/O structure by TC, and updated PA0/4/5 and PC5/14 I/O structure,

and added note 2 in Table 15: STM32L053x6/8 pin definitions.

Updated Table 24: General operating conditions, Table 21: Voltage

characteristics and Table 22: Current characteristics.

Modified conditions in Table 27: Embedded internal reference voltage.

Updated Table 28: Current consumption in Run mode, code with data

processing running from Flash, Table 30: Current consumption in Run

mode, code with data processing running from RAM, Table 32: Current

consumption in Sleep mode, Table 33: Current consumption in Low-

power run mode, Table 34: Current consumption in Low-power sleep

mode,Table 35: Typical and maximum current consumptions in Stop

mode and Table 36: Typical and maximum current consumptions in

Standby mode. Added Figure 12: IDD vs VDD, at TA= 25/55/85/105 °C,

Run mode, code running from Flash memory, Range 2, HSE, 1WS,

Figure 13: IDD vs VDD, at TA= 25/55/85/105 °C, Run mode, code

running from Flash memory, Range 2, HSI16, 1WS, Figure 14: IDD vs

VDD, at TA= 25/55/ 85/105/125 °C, Low-power run mode, code running

from RAM, Range 3, MSI (Range 0) at 64 KHz, 0 WS, Figure 15: IDD

vs VDD, at TA= 25/55/ 85/105/125 °C, Stop mode with RTC enabled

and running on LSE Low drive and Figure 16: IDD vs VDD, at TA=

25/55/85/105/125 °C, Stop mode with RTC disabled, all clocks OFF.

Updated Table 43: HSE oscillator characteristics and Table 44: LSE

oscillator characteristics. Added Figure 21: HSI16 minimum and

maximum value versus temperature.

Updated Table 55: ESD absolute maximum ratings, Table 57: I/O

current injection susceptibility, Table 58: I/O static characteristics.

Added Figure 22: VIH/VIL versus VDD (CMOS I/Os) and Figure 23:

VIH/VIL versus VDD (TTL I/Os).

Updated Table 59: Output voltage characteristics, Table 60: I/O AC

characteristics and Figure 24: I/O AC characteristics definition.

Updated Table 62: ADC characteristics, Table 64: ADC accuracy, and

Figure 27: Typical connection diagram using the ADC. Updated

Table 66: Temperature sensor calibration values.

Updated Table 73: SPI characteristics in voltage Range 1 and Table 76:

I2S characteristics.

Added Figure 46: Thermal resistance.

STM32L053C6 Datasheet(PDF) 126 Page - STMicroelectronics

STM32L053C6 Datasheet(HTML) 126 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL