AS04008PS-4W-R
AI

## Technical Overview: AS04008PS-4W-R
The **AS04008PS-4W-R** is a high-performance, miniature speaker manufactured by **PUI Audio**. It belongs to their "AS" series and is designed for applications requiring a compact footprint without sacrificing audio clarity or power handling.
---
### 1. Key Technical Specifications
| Parameter | Value |
| :--- | :--- |
| **Impedance** | 8 Ohms |
| **Power Rating (Nominal)** | 0.5 Watts |
| **Power Rating (Max)** | 1.0 Watts |
| **Frequency Range** | 500 Hz ~ 20,000 Hz |
| **Sensitivity (SPL)** | 84 dB @ 0.5W / 0.1M |
| **Dimensions** | 40mm x 8mm (Slim Profile) |
| **Cone Material** | Paper / Cloth |
| **Mounting Type** | Surface Mount / Bracket |
---
### 2. Component Composition
The internal electronic and mechanical parts of this speaker include:
* **Permanent Magnet:** Typically Neodymium (NdFeB), which provides a high magnetic flux density in a small size.
* **Voice Coil:** A precision-wound copper wire coil that reacts to the electrical signal to create movement.
* **Diaphragm (Cone):** A lightweight material designed for rapid vibration to produce sound waves.
* **Solder Pads:** Located on the rear for electrical connection to a PCB or wire harness.
---
### 3. Electrical Characteristics
Unlike larger drivers, the AS04008PS-4W-R is optimized for **mid-to-high frequency reproduction**.
* **Resonant Frequency ($F_s$):** Usually around 500 Hz. Driving the speaker significantly below this frequency can lead to distortion or physical damage.
* **Driving Circuitry:** It is typically driven by a Class-D audio amplifier or a simple PWM signal through a transistor for basic notification tones.
---
### 4. Common Applications
* **Handheld Devices:** Radios, scanners, and portable GPS units.
* **IoT Hardware:** Smart home hubs and security panels.
* **Medical Instrumentation:** Alarms and voice prompts in diagnostic equipment.
* **Industrial Panels:** Audible feedback for user interfaces.
---
### 5. Implementation Example
To interface this speaker with a microcontroller (like an Arduino or ESP32), a simple amplification circuit is required:
```cpp
// Example: Generating a 1kHz tone for a notification
const int speakerPin = 9;
void setup() {
pinMode(speakerPin, OUTPUT);
}
void loop() {
tone(speakerPin, 1000); // Send 1KHz sound signal
delay(500);
noTone(speakerPin); // Stop sound
delay(2000);
}
```
- ⤷
What is the maximum operating temperature for this speaker?
- ⤷ How do I calculate the correct capacitor value for a DC-blocking filter with an 8-ohm speaker?
- ⤷ What are the mounting recommendations to prevent acoustic short-circuiting?