AI

## Technical Overview: ASE02808MR-LW150-R
The **ASE02808MR-LW150-R** is a high-performance, miniature dynamic speaker manufactured by **PUI Audio**. It is specifically designed for compact electronic devices requiring clear voice reproduction or signal tones.
---
### 1. Key Technical Specifications
| Parameter | Specification | Details |
| :--- | :--- | :--- |
| **Speaker Type** | Dynamic Speaker | Permanent Magnet / Moving Coil |
| **Impedance** | 8 Ohms ± 15% | Standard low-impedance load |
| **Rated Power** | 0.8 Watts | Continuous operating power |
| **Max Power** | 1.0 Watt | Short-term peak handling |
| **Sensitivity** | 83 ± 3 dB | Measured at 0.1W / 0.1m |
| **Frequency Range** | 500 Hz ~ 20,000 Hz | Optimized for mid-to-high range |
| **Resonant Freq (Fo)**| 500 Hz ± 20% | The natural vibration frequency |
---
### 2. Physical Characteristics & Construction
This component is engineered for space-constrained environments:
* **Dimensions:** 28mm (Length) x 8mm (Width) x 5mm (Height).
* **Weight:** Approximately 2.4 grams.
* **Lead Wires:** The "LW150" suffix indicates it comes with **150mm** pre-attached lead wires (typically 32 AWG), facilitating easy connection to a PCB without requiring surface mount soldering on the speaker itself.
* **Diaphragm Material:** Mylar (Polyethylene Terephthalate), which provides moisture resistance and durability.
---
### 3. Electronic Integration
To integrate this part into a circuit, consider the following electronic principles:
#### A. Driving the Speaker
Because this is an 8-ohm dynamic speaker, it should be driven by an **Audio Power Amplifier** (e.g., Class D or Class AB).
> **Note:** Connecting this directly to a microcontroller (MCU) GPIO pin is not recommended, as the current draw will likely exceed the pin's limit and damage the MCU.
#### B. Polarity
The red wire typically represents the positive (+) terminal. Correct polarity is essential in multi-speaker setups to ensure they are "in phase," preventing sound cancellation.
#### C. Enclosure Design
The "R" in the part number often signifies RoHS compliance. For the best acoustic performance, this speaker should be mounted in a sealed or vented enclosure. Without an enclosure, the "back-wave" will cancel out the "front-wave," resulting in very thin sound and poor bass.
---
### 4. Common Applications
* Handheld medical devices.
* Scanners and POS terminals.
* IoT smart home sensors (voice alerts).
* Compact security alarm panels.
- ⤷
What is the recommended amplifier circuit for a 0.8W 8-ohm speaker?
- ⤷ How does the resonant frequency affect the audio output quality?
- ⤷ What are the benefits of using a Mylar diaphragm in this speaker?