ATS-08F-33-C2-R0
AI

The **ATS-08F-33-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It is designed to dissipate heat from electronic components like CPUs, GPUs, or power transistors to prevent thermal throttling or hardware failure.
---
### 1. Technical Specifications
The part number follows a specific nomenclature that defines its physical and thermal characteristics.
| Feature | Specification |
| :--- | :--- |
| **Manufacturer** | Advanced Thermal Solutions (ATS) |
| **Material** | Aluminum (Blue Anodized) |
| **Attachment Method** | pushPIN™ |
| **Dimensions** | 35mm x 35mm x 20mm |
| **Thermal Resistance** | 17.42 °C/W (Unducted @ 100 LFM) |
| **Airflow Pattern** | Vertical (Cross-Cut Fin Design) |
| **Thermal Interface Material (TIM)** | T766 (Pre-applied) |
---
### 2. Key Design Features
#### A. pushPIN™ Attachment System
Instead of using messy adhesives or simple clips, this model uses a proprietary **pushPIN™** system.
* **Precision:** It utilizes a brass component and a compression spring to ensure even pressure across the electronic chip.
* **Reliability:** The hardware ensures the heat sink stays attached during vibration or shipping.
#### B. Cross-Cut Fin Design
The fins are not just straight lines; they are "cross-cut." This allows for:
* **Omnidirectional Airflow:** It can receive cooling air from any direction, making it ideal for crowded PCB layouts.
* **Increased Surface Area:** The pattern increases the area available for heat transfer without increasing the overall footprint.
#### C. Thermal Interface Material (TIM)
The unit comes with **T766** pre-applied to the base. This is a high-quality thermal pad/grease that fills microscopic air gaps between the component and the heat sink, significantly lowering thermal resistance.
---
### 3. Applications
This part is commonly found in:
* **Telecommunications:** Cooling high-speed networking chips.
* **Embedded Systems:** Industrial PCs and automation controllers.
* **Power Electronics:** Dissipating heat from Voltage Regulator Modules (VRMs).
---
- ⤷
How does the thermal resistance of this heat sink change at higher airflow speeds?
- ⤷ What are the specific hole patterns required on a PCB for the pushPIN™ attachment?
- ⤷ Can the T766 thermal interface material be replaced with a different compound for higher performance?