BAW56G-AE3-R
AI

## BAW56G-AE3-R Overview
The **BAW56G-AE3-R** is a high-speed switching diode configured in a **common anode** dual-diode arrangement. It is widely used in signal processing and protection circuits where space-saving and high-speed switching are required.
---
### 1. Key Technical Specifications
Below are the primary electrical characteristics of the BAW56 series:
| Parameter | Symbol | Value | Unit |
| :--- | :--- | :--- | :--- |
| **Repetitive Peak Reverse Voltage** | $V_{RRM}$ | 70 | V |
| **Forward Continuous Current** | $I_F$ | 215 | mA |
| **Reverse Recovery Time** | $t_{rr}$ | 6.0 | ns |
| **Forward Voltage** (at 150mA) | $V_F$ | 1.25 | V |
| **Power Dissipation** | $P_d$ | 225 | mW |
| **Package Type** | SOT-23 | - | - |
---
### 2. Internal Configuration
The BAW56 consists of two diodes connected in a specific layout:
* **Pin 1:** Cathode (Diode 1)
* **Pin 2:** Cathode (Diode 2)
* **Pin 3:** Common Anode (Both Diodes)
---
### 3. Application Areas
Because of its fast switching capabilities and small footprint, this component is commonly found in:
1. **High-Speed Switching:** Used in digital circuits to ensure rapid transitions.
2. **ESD/Clamping Protection:** Protecting sensitive I/O lines from voltage spikes by clamping the signal to the supply rails.
3. **Signal Rectification:** Small-signal AC to DC conversion in communication devices.
4. **Reverse Polarity Protection:** Protecting low-power modules from incorrect battery insertion.
---
### 4. Part Number Breakdown (UTC/Unisonic)
The suffix codes usually indicate specific manufacturing standards:
* **BAW56:** Basic series part number.
* **G:** Halogen-free and RoHS compliant (Green).
* **AE3:** Refers to the **SOT-23** package type.
* **R:** Tape and Reel packaging for automated SMT assembly.
---
- ⤷
What are the main differences between BAW56 (common anode) and BAV70 (common cathode)?
- ⤷ Can you provide a circuit diagram example for using BAW56 as a clamping diode?
- ⤷ What is the maximum operating temperature for the BAW56G-AE3-R?