AI

# Electronic Specifications: M24C32-RMB6TG
The **M24C32-RMB6TG** is a high-performance, low-voltage **32-Kbit serial I²C Bus EEPROM** manufactured by STMicroelectronics. It is commonly used for parameter storage in mobile devices, medical electronics, and consumer hardware due to its compact form factor and low power consumption.
---
## 1. Core Technical Specifications
The following table summarizes the primary electrical and physical characteristics:
| Parameter | Specification |
| :--- | :--- |
| **Memory Size** | 32 Kbit (4,096 bytes x 8 bits) |
| **Interface** | I²C (Two-Wire Serial) |
| **Supply Voltage ($V_{CC}$)** | 1.8V to 5.5V |
| **Clock Frequency** | 400 kHz (Fast Mode) / 1 MHz (Fast Mode Plus) |
| **Package Type** | UFDFPN8 (Ultra-Thin Dual Flat No-Lead) |
| **Operating Temperature** | -40°C to +85°C |
| **Write Cycles (Endurance)** | 4 million write cycles |
| **Data Retention** | 200 years |
---
## 2. Key Internal Features
### A. Memory Organization
The memory is organized as **4,096 words of 8 bits each**. It utilizes an internal page architecture for writing:
* **Page Size:** 32 bytes.
* **Random Read:** Allows access to any specific byte.
* **Sequential Read:** Allows reading the entire memory map in a single burst.
### B. Hardware Write Protection
The device features a **Write Control (WC)** pin.
* If **WC** is high ($V_{IH}$), the entire memory is protected against write instructions.
* If **WC** is low ($V_{IL}$), the memory is write-enabled.
### C. Low Power Management
Designed for battery-powered applications, the chip enters a **Standby Mode** automatically after a write or read cycle, reducing current consumption to approximately **1 $\mu$A** at 1.8V.
---
## 3. Pin Configuration (UFDFPN8)
| Pin Number | Name | Description |
| :--- | :--- | :--- |
| 1, 2, 3 | E0, E1, E2 | Chip Enable (Address) inputs to allow up to 8 devices on the same bus. |
| 4 | $V_{SS}$ | Ground. |
| 5 | SDA | Serial Data (Bidirectional). |
| 6 | SCL | Serial Clock (Input). |
| 7 | WC | Write Control (Hardware protection). |
| 8 | $V_{CC}$ | Supply Voltage. |
---
## 4. Part Number Breakdown: M24C32-RMB6TG
To understand the specific variant:
* **M24**: I²C Serial Access EEPROM.
* **C32**: 32 Kbit density.
* **-R**: Operating voltage range (1.8V to 5.5V).
* **MB**: UFDFPN8 package (MLP8).
* **6**: Industrial temperature range (-40 to 85°C).
* **T**: Tape and Reel packing.
* **G**: ECOPACK2 (RoHS compliant/Lead-free).
---
- ⤷
What is the maximum write time (tW) for a single page on this EEPROM?
- ⤷ How do the E0
- ⤷ E1
- ⤷ and E2 pins function when connecting multiple M24C32 devices?
- ⤷ What are the specific pull-up resistor requirements for the SDA and SCL lines at 400kHz?