Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  

  • M2VF2-B1-R/CE

  • AI
    The **M2VF2-B1-R/CE** is a high-performance, signal-conditioning electronic module manufactured by **M-System**. It belongs to the M2 Series and is specifically a **V-Network Signal Conditioner** designed to convert and isolate DC input signals into standardized output signals. --- ## 1. Technical Specifications The following table summarizes the core electronic characteristics of the M2VF2-B1-R/CE model: | Feature | Specification | | :--- | :--- | | **Input Signal** | 4 to 20 mA DC | | **Output Signal** | 4 to 20 mA DC | | **Power Input** | 24V DC (R code) | | **Accuracy** | ±0.1% of span | | **Response Time** | ≤ 0.5 seconds (0 – 90%) | | **Isolation** | 3-way (Input - Output - Power) | | **Dielectric Strength** | 2000V AC @ 1 minute | | **Standards** | CE Marking compliant | --- ## 2. Key Component Functions The device operates using a specific internal architecture to ensure signal integrity and safety: ### A. Signal Isolation (Optical/Magnetic) The module uses 3-way isolation. This prevents ground loops and protects sensitive PLC/DCS input cards from high-voltage surges or electrical noise originating at the field sensor side. ### B. Precision Operational Amplifiers High-linearity op-amps are used to ensure that the 4-20mA input is mirrored to the output with minimal drift. The "V-Network" circuitry helps in stabilizing signals that might fluctuate due to impedance changes. ### C. Power Conversion (DC/DC Converter) The "R" suffix indicates a 24V DC power supply. Internally, the unit uses a DC/DC converter to regulate voltage for the internal logic while maintaining the isolation barrier between the power rails and the signal path. --- ## 3. Terminal Connections The device is typically mounted on a DIN rail and uses a plug-in base. The wiring configuration is generally categorized as follows: 1. **Input Terminals:** Connection for the 4-20mA current loop from the field transmitter. 2. **Output Terminals:** Provides the isolated 4-20mA signal to the control system. 3. **Power Terminals:** 24V DC input (Polarity sensitive). --- ## 4. Deciphering the Model Code To understand the specific electronics of this unit, the suffix breakdown is as follows: * **M2VF2**: Model series (V-Network Signal Conditioner). * **B**: Output signal (4 - 20 mA DC). * **1**: Input signal (4 - 20 mA DC). * **R**: Power input (24V DC). * **CE**: European Conformity (EMC and Safety standards).
    ✨ Follow-up Questions
    • ⤷ How does the 3-way isolation in this module prevent ground loops?
    • ⤷ What is the maximum load resistance supported by the 4-20mA output?
    • ⤷ Are there specific environmental conditions required for mounting the M2VF2?