M93C56-RMB7TP
AI

The **M93C56-RMB7TP** is a specific variant of the 2-Kbit serial MICROWIRE EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by STMicroelectronics. It is commonly used for parameter storage in automotive and industrial applications.
---
### 1. Key Technical Specifications
| Parameter | Specification |
|:---|:---|
| **Memory Size** | 2 Kbit (2048 bits) |
| **Organization** | Configurable: 128 x 16-bit or 256 x 8-bit |
| **Interface** | MICROWIRE (3-wire Serial Interface) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Clock Frequency** | 2 MHz (at 4.5V - 5.5V) |
| **Package Type** | UFDFPN8 (Ultra-thin Fine pitch Dual Flat No-lead) |
| **Temperature Range** | -40°C to +85°C (Industrial Grade) |
---
### 2. Functional Characteristics
* **Instruction Set:** Supports standard MICROWIRE instructions including `READ`, `WRITE`, `ERASE`, `WEN` (Write Enable), and `WDS` (Write Disable).
* **Write Protection:** The device includes a software write-protection mechanism via the Write Enable/Disable instructions to prevent accidental data corruption.
* **Data Retention:** Guaranteed for more than 40 years.
* **Endurance:** Capable of more than 1 million (1,000,000) write cycles.
* **Sequential Read:** Allows for continuous data streaming from the memory array.
---
### 3. Pinout Configuration (UFDFPN8)
The device typically uses an 8-pin layout. Below is the standard mapping for the M93C series:
| Pin Number | Name | Description |
|:---:|:---:|:---|
| 1 | **S** | Chip Select |
| 2 | **C** | Serial Clock |
| 3 | **D** | Serial Data Input |
| 4 | **Q** | Serial Data Output |
| 5 | **Vss** | Ground |
| 6 | **ORG** | Organization Select (x8 or x16) |
| 7 | **DU** | Don't Use / Reserved |
| 8 | **Vcc** | Supply Voltage |
---
### 4. Part Number Breakdown: `M93C56-RMB7TP`
* **M93**: STMicroelectronics MICROWIRE EEPROM family.
* **C56**: 2-Kbit density.
* **-R**: Low voltage range (1.8V to 5.5V).
* **MB**: UFDFPN8 package (2x3 mm).
* **7**: Device tested with a specific high-reliability process (often refers to Grade 7 temperature or specialized screening).
* **T**: Tape and Reel packing.
* **P**: ECOPACK2 (RoHS compliant/Lead-free).
---
- ⤷
How does the ORG pin affect the memory structure of the M93C56?
- ⤷ What are the primary differences between MICROWIRE and SPI interfaces?
- ⤷ In what scenarios would the 1.8V operating mode be preferred over 5V?