M93C66-RDS3TP/S
AI

The **M93C66-RDS3TP/S** is a specific variant of a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by STMicroelectronics. It is widely used for non-volatile data storage in consumer electronics and industrial applications.
---
## 1. Technical Specifications
The part number encodes specific characteristics of the device. Below is a breakdown of its core technical parameters:
| Parameter | Value / Description |
| :--- | :--- |
| **Memory Size** | 4 Kbit (organized as 512 x 8 bits or 256 x 16 bits) |
| **Interface** | MICROWIRE (Serial 3-Wire Interface) |
| **Supply Voltage (Vcc)** | 1.8V to 5.5V |
| **Clock Frequency** | 2 MHz |
| **Package Type** | TSSOP8 (Thin Shrink Small Outline Package) |
| **Operating Temp** | -40°C to +125°C (Automotive Grade 3) |
| **Write Cycles** | 4 million write cycles |
| **Data Retention** | 200 Years |
---
## 2. Pin Configuration (TSSOP8)
The device typically follows a standard 8-pin layout for the MICROWIRE protocol:
1. **S (Chip Select):** Activates the device for communication.
2. **C (Serial Clock):** Synchronizes data movement.
3. **D (Serial Data Input):** Receives opcodes, addresses, and data.
4. **Q (Serial Data Output):** Outputs data during read operations.
5. **Vss:** Ground.
6. **ORG (Organization):** Sets the memory structure (x8 or x16).
7. **DU (Don't Use):** Usually left unconnected or tied to ground.
8. **Vcc:** Power Supply.
---
## 3. Key Features
* **Sequential Read:** Allows the user to read the entire memory contents with a single command.
* **Write Protection:** The device includes software write-protection features to prevent accidental data corruption.
* **Ready/Busy Status:** A specific signal can be polled to check if the internal write cycle is complete.
* **Self-Timed Programming:** The chip manages its own internal erase/write timing, simplifying the firmware logic for the host microcontroller.
---
## 4. Part Number Breakdown
The suffix `RDS3TP/S` provides specific logistical and manufacturing details:
* **RDS:** Refers to the TSSOP8 package and the 1.8V to 5.5V voltage range.
* **3:** Indicates the temperature range (-40°C to +125°C).
* **TP:** Indicates "Tape and Reel" packaging for automated SMT assembly.
* **/S:** Usually signifies a "Special" or "Specific" process version, often related to high-reliability or automotive-grade testing standards.
---
- ⤷
How does the ORG pin change the memory addressing between 8-bit and 16-bit modes?
- ⤷ What are the main differences between the MICROWIRE interface and the I2C protocol used in other EEPROMs?
- ⤷ What is the typical power consumption of this chip during a write cycle?