M93C76-RMB6G
AI

The **M93C76-RMB6G** is an 8-Kbit serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by STMicroelectronics. It is commonly used for non-volatile data storage in consumer electronics and industrial applications.
---
## 1. Technical Specifications
Below are the primary electrical and physical characteristics of the component:
| Feature | Specification |
| :--- | :--- |
| **Memory Size** | 8 Kbit (1024 x 8 bits or 512 x 16 bits) |
| **Interface** | MICROWIRE (Serial 3-Wire) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Clock Frequency** | 2 MHz (at 4.5V - 5.5V) |
| **Package Type** | UFDFPN8 (MLP8) - Ultra thin fine pitch dual flat no lead |
| **Operating Temp Range** | -40°C to +85°C |
| **Write Cycles** | 4 million cycles (typical) |
| **Data Retention** | 200 Years |
---
## 2. Pin Configuration
The M93C76-RMB6G typically uses an 8-pin layout. The functionality of the pins is as follows:
1. **S (Chip Select):** Activates the device when high.
2. **D (Serial Data Input):** Receives instructions and data.
3. **C (Serial Clock):** Synchronizes the data transfer.
4. **Q (Serial Data Output):** Outputs data during read operations.
5. **VCC:** Supply voltage.
6. **VSS:** Ground.
7. **ORG (Organization):** Sets the memory architecture (x8 or x16).
8. **DU (Don't Use):** Usually left unconnected or grounded.
---
## 3. Key Electronic Features
### Configurable Organization
One of the distinct features of the M93C76 is the **ORG pin**.
- If ORG is connected to **VCC**, the memory is organized as **512 x 16 bits**.
- If ORG is connected to **VSS**, it is organized as **1024 x 8 bits**.
### Low Power Consumption
Designed for mobile and battery-powered devices, it features:
- **Active Read Current:** 1 mA (max)
- **Standby Current:** 1 µA (max at 1.8V)
### Protection Mechanisms
The chip includes a **Write Enable/Disable** instruction set. This prevents accidental data erasure or overwriting during power-up or power-down sequences.
---
## 4. Part Number Breakdown
Understanding the suffixes for `M93C76-RMB6G`:
| Suffix | Meaning |
| :--- | :--- |
| **M93C** | Standard MICROWIRE Interface |
| **76** | 8 Kbit Density |
| **-R** | Low Voltage (1.8V to 5.5V) |
| **MB** | UFDFPN8 Package (2x3 mm) |
| **6** | Industrial Temperature Range (-40 to 85°C) |
| **G** | ECOPACK2 (RoHS compliant/Halogen-free) |
---
- ⤷
What are the main differences between MICROWIRE and I2C protocols for EEPROMs?
- ⤷ How do I wire the ORG pin for a specific 16-bit data architecture?
- ⤷ What are the common alternatives to the M93C76 if I need more storage?