M93C86-RMB3G
AI

The **M93C86-RMB3G** is a high-reliability, low-voltage serial Electrically Erasable Programmable Read-Only Memory (EEPROM). It is manufactured by STMicroelectronics and is commonly used for parameter storage in automotive and industrial applications.
---
## 1. Technical Specifications
Below are the primary electronic characteristics of the M93C86-RMB3G:
| Parameter | Specification |
| :--- | :--- |
| **Memory Size** | 16 Kbit (2,048 x 8 bits or 1,024 x 16 bits) |
| **Interface** | MICROWIRE (3-wire Serial) |
| **Operating Voltage (Vcc)** | 1.8V to 5.5V |
| **Clock Frequency** | 2 MHz (at 4.5V - 5.5V) |
| **Package Type** | UFDFPN8 (MLP8) - Ultra-thin Fine pitch Dual Flat No-lead |
| **Temperature Range** | -40°C to +125°C (Automotive Grade 3) |
| **Write Cycles** | 4,000,000 Cycles (High Endurance) |
| **Data Retention** | 200 Years |
---
## 2. Pin Configuration
The device usually comes in an 8-pin package. The functions are defined as follows:
1. **S (Chip Select):** Activates the device when held high.
2. **D (Serial Data Input):** Receives instructions and data.
3. **Q (Serial Data Output):** Transmits data to the microcontroller.
4. **C (Serial Clock):** Synchronizes the data transfer.
5. **ORG (Organization Select):** Sets the memory architecture (x8 or x16).
6. **Vcc/Vss:** Power supply and Ground.
7. **DU/NC:** Do not use or No connection.
---
## 3. Key Electronic Features
### A. Flexible Organization
The **ORG** pin allows the user to define how the 16 Kbits are addressed:
* **ORG at Vcc:** 1024 words of 16 bits each.
* **ORG at Vss (or floating):** 2048 words of 8 bits each.
### B. High Reliability
The "R" in the part number signifies a specific voltage range, and the "3" indicates it is qualified for **Automotive Grade 3**. It includes an internal "Write-in-progress" polling feature to ensure the microcontroller knows when the self-timed write cycle is complete.
### C. Low Power Consumption
Designed for battery-operated or energy-efficient systems, it features:
* **Active Read Current:** < 1 mA
* **Standby Current:** < 1 µA (at 1.8V)
---
## 4. Part Number Breakdown
The suffix **RMB3G** provides specific information about the physical and chemical properties:
* **RM:** Indicates the 1.8V to 5.5V operating range.
* **MB:** Specifies the **UFDFPN8** (2x3 mm) package.
* **3:** Automotive Grade temperature range (-40°C to 125°C).
* **G:** ECOPACK2 (RoHS compliant and Halogen-free).
---
- ⤷
What is the difference between MICROWIRE and SPI interfaces for EEPROMs?
- ⤷ How does the ORG pin influence the hardware wiring of the M93C86?
- ⤷ What are the common failure modes for EEPROMs in automotive environments?