M93C86-RMB3T
AI

## Technical Overview: M93C86-RMB3T
The **M93C86-RMB3T** is a specific variant of the 16-Kbit serial MICROWIRE EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by **STMicroelectronics**. It is widely used for non-volatile storage in automotive and industrial applications.
---
### 1. Device Specifications
The following table highlights the core electronic characteristics of the M93C86-RMB3T:
| Feature | Specification |
| :--- | :--- |
| **Memory Size** | 16 Kbit (2048 x 8 bits or 1024 x 16 bits) |
| **Interface** | MICROWIRE (3-Wire Serial) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Clock Frequency** | 2 MHz (at 4.5V - 5.5V) |
| **Package Type** | UFDFPN8 (MLP8) - Ultra thin fine pitch dual flat no lead |
| **Temperature Range** | -40°C to +125°C (Automotive Grade 3) |
| **Data Retention** | > 40 Years |
| **Write Cycles** | > 1,000,000 Cycles |
---
### 2. Key Electronic Features
* **Organization:** The memory structure is user-selectable. Depending on the logic state of the "Organization" (ORG) pin, it can function as 2048 bytes (x8) or 1024 words (x16).
* **Low Power Consumption:** Designed for battery-operated devices, featuring a low supply current (typical 1 mA for read/write) and a standby current of less than 1 µA.
* **Self-Timed Write Cycle:** The device includes an internal timer. Once a write command is initiated, the device manages the erasing and programming of the memory cell automatically.
* **Ready/Busy Signal:** During a write cycle, the Data Out (DO) pin can be used to poll the status of the operation (High = Ready, Low = Busy).
* **Sequential Read:** Allows for continuous data streaming from the memory without needing to send new addresses for each word.
---
### 3. Pin Configuration (UFDFPN8)
The device typically utilizes an 8-pin layout:
| Pin Name | Function |
| :--- | :--- |
| **S (CS)** | Chip Select (Active High) |
| **D (SI)** | Serial Data Input |
| **Q (SO)** | Serial Data Output |
| **C (SK)** | Serial Clock |
| **ORG** | Organization Select (x8 or x16) |
| **Vcc / Vss** | Power Supply / Ground |
---
### 4. Part Number Breakdown
The suffix **RMB3T** provides specific details about the physical and chemical properties:
* **R:** Operating Voltage (1.8V to 5.5V).
* **MB:** Package (UFDFPN8, 2x3 mm).
* **3:** Temperature Range (-40 to +125 °C).
* **T:** Packing (Tape and Reel).
---
- ⤷
What are the main differences between MICROWIRE and SPI interfaces for EEPROMs?
- ⤷ How does the 'Organization' (ORG) pin physically change the memory addressing?
- ⤷ In what specific automotive systems is the M93C86 typically used?