M93C86-RMB7T
AI

## M93C86-RMB7T: Electronic Component Specifications
The **M93C86-RMB7T** is a 16-Kbit serial MICROWIRE EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by **STMicroelectronics**. It is widely used for non-volatile data storage in consumer, industrial, and automotive applications.
---
### 1. General Overview
| Attribute | Specification |
| :--- | :--- |
| **Memory Size** | 16 Kbit (16,384 bits) |
| **Interface** | MICROWIRE (3-wire serial interface) |
| **Organization** | Configurable: 2048 x 8-bit or 1024 x 16-bit |
| **Operating Voltage** | 1.8V to 5.5V |
| **Package Type** | UFDFPN8 (Ultra-thin Fine pitch Dual Flat No-lead) |
| **Temperature Range** | -40°C to +105°C (Grade 7) |
---
### 2. Key Technical Features
* **Write Protection:** Includes a software write protection mechanism for all memory locations.
* **Clock Frequency:** Supports a clock rate up to **2 MHz**.
* **Data Retention:** Greater than **40 years**.
* **Endurance:** High reliability with **over 1,000,000 (1M) write cycles**.
* **Sequential Read:** Allows for continuous data streaming from a starting address.
* **Ready/Busy Signal:** Provides a status signal on the Data Out (DO) pin during internal write cycles.
---
### 3. Pin Configuration (UFDFPN8)
The device typically uses an 8-pin layout to handle power, communication, and configuration:
| Pin Name | Description | Function |
| :--- | :--- | :--- |
| **S** | Chip Select | Activates the device for communication. |
| **D** | Serial Data Input | Receives instructions and data from the MCU. |
| **Q** | Serial Data Output | Sends data or status to the MCU. |
| **C** | Serial Clock | Synchronizes the data transfer. |
| **ORG** | Organization Select | High = x16 organization; Low = x8 organization. |
| **VCC / VSS** | Supply Voltage / Ground | Power pins (1.8V - 5.5V). |
| **NC / DU** | Not Connected / Don't Use | Reserved pins. |
---
### 4. Part Number Breakdown: M93C86-RMB7T
* **M93C**: MICROWIRE serial EEPROM family.
* **86**: Density (16 Kbit).
* **-R**: Operating voltage (1.8V to 5.5V).
* **MB**: Package type (UFDFPN8 2x3 mm).
* **7**: Temperature range (-40 to +105°C).
* **T**: Tape and Reel packaging.
---
### 5. Common Applications
* **Automotive:** Storing calibration data or odometer readings in instrument clusters.
* **Industrial:** Parameter storage for sensors and controllers.
* **Consumer Electronics:** Configuration settings for TVs, printers, and monitors.
- ⤷
What are the differences between the MICROWIRE and I2C interfaces for EEPROMs?
- ⤷ Can the ORG pin be changed dynamically during operation?
- ⤷ How does the 'Ready/Busy' signal function on the Q pin during a write cycle?