NWW3JB10K0
AI

The part number **NWW3JB10K0** refers to a specific type of electronic component, primarily a **Wirewound Resistor** manufactured by **Stackpole Electronics**.
---
## 1. Technical Specifications Table
| Parameter | Specification |
| :--- | :--- |
| **Manufacturer** | Stackpole Electronics |
| **Series** | NWW (General Purpose Wirewound) |
| **Resistance Value** | 10 kΩ (10,000 Ohms) |
| **Power Rating** | 3 Watts |
| **Tolerance** | ±5% (indicated by 'J') |
| **Temperature Coefficient** | ±20 ppm/°C |
| **Termination Style** | Axial Leaded |
| **Construction** | All-welded construction |
---
## 2. Part Number Breakdown
The part number follows a specific nomenclature used by Stackpole:
1. **NWW**: Indicates the Series (Non-inductive Wirewound / General Purpose).
2. **3**: The Power Rating (3 Watts).
3. **J**: The Tolerance code (J = ±5%).
4. **B**: The Packaging code (typically Bulk).
5. **10K0**: The Resistance value (10K0 = 10,000 Ω).
---
## 3. Key Electronic Characteristics
### Construction
Wirewound resistors are made by winding a resistive wire (usually a Nichrome alloy) around a ceramic or fiberglass core. This is then coated with a protective material (silicone or vitreous enamel).
### Thermal Performance
Because they are wirewound, these resistors are excellent at handling **high power** and **thermal stress** compared to standard carbon film or metal film resistors. The 3W rating means it can dissipate a significant amount of heat relative to its size.
### Stability and Reliability
* **Low TCR**: The temperature coefficient is very low, meaning the resistance doesn't change significantly as the component heats up.
* **Durability**: Wirewound components are robust against surge currents and high-voltage pulses.
---
## 4. Common Applications
* **Power Supplies**: Used for current sensing or as bleeder resistors.
* **Motor Controllers**: Handling high-load currents.
* **Audio Equipment**: Often used in crossover networks because of their power handling.
* **Industrial Controls**: Used where long-term stability under heat is required.
- ⤷
What is the physical size/dimensions of a 3W axial wirewound resistor?
- ⤷ Are there non-inductive versions of the NWW series for high-frequency use?
- ⤷ How does a wirewound resistor compare to a metal oxide resistor in terms of surge handling?