Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  

  • P9242-RNDGI

  • AI
    ## Overview of the P9242-RNDGI The **P9242-RNDGI** is a highly integrated, magnetic induction, wireless power transmitter (TX) IC developed by Renesas Electronics (formerly IDT). It is specifically designed for wireless charging applications, compliant with the Qi-standard (WPC 1.2.4). --- ### 1. Key Technical Specifications | Feature | Specification | | :--- | :--- | | **Manufacturer** | Renesas Electronics | | **Power Capacity** | Up to 15W (Extended Power Profile - EPP) | | **Input Voltage** | 4.25V to 21V | | **Interface** | I2C, GPIO, UART | | **Package** | 48-VFQFN (6x6 mm) | | **Standards** | WPC 1.2.4 (Qi) Compliant | | **Processor** | Integrated 32-bit ARM® Cortex®-M0 | --- ### 2. Functional Components The P9242-RNDGI acts as a "System-on-Chip" (SoC) for wireless charging. It integrates several critical electronic sub-systems: #### A. Power Stage and Drivers * **Integrated MOSFET Drivers:** It contains the circuitry needed to drive an external Full-Bridge or Half-Bridge inverter, which converts DC power into the AC signal for the transmission coil. * **Current Sensing:** Integrated high-side current sensing for Foreign Object Detection (FOD). #### B. Control Logic (The Brain) * **ARM® Cortex®-M0 Core:** A programmable 32-bit microcontroller that manages the charging protocol, communication with the receiver (RX), and safety features. * **Memory:** Includes 32KB of Flash memory and 4KB of SRAM for firmware execution. #### C. Safety and Protection Circuits * **Foreign Object Detection (FOD):** Uses sophisticated algorithms to detect metal objects between the transmitter and receiver to prevent overheating. * **Thermal Protection:** Integrated temperature sensors to shut down the system if it exceeds safe operating limits. * **Over-Voltage/Current Protection:** Hardware-level safeguards to prevent circuit damage. --- ### 3. Typical Application Circuit Components When designing a board with the P9242-RNDGI, several external components are required: 1. **Power MOSFETs:** External N-Channel MOSFETs for the H-bridge power stage. 2. **Resonant Capacitors:** High-quality C0G/NPO capacitors to form the LC resonant tank with the coil. 3. **Transmitter Coil:** Usually a standard Qi-compliant coil (e.g., MP-A2 type). 4. **Decoupling Capacitors:** To stabilize the input voltage and internal LDOs. 5. **I2C Pull-ups:** For communication with a host controller (optional). --- ### 4. Advantages * **High Efficiency:** Optimized for low standby power and high conversion efficiency. * **Programmability:** The firmware can be customized to support proprietary fast-charging protocols beyond standard Qi. * **Small Footprint:** High integration reduces the total Bill of Materials (BOM) count. ---
    ✨ Follow-up Questions
    • ⤷ What are the differences between the P9242 and the P9241 series?
    • ⤷ How is the Foreign Object Detection (FOD) calibrated in this chip?
    • ⤷ Can this IC be used for multi-coil wireless charging designs?