WAC-A1BA-R
AI

The **WAC-A1BA-R** is a specific electronic component, typically categorized as a **Surface Mount Device (SMD) Wire-to-Board Header or Connector**. It is widely used in automotive and industrial electronics for high-reliability signal transmission.
---
### 1. Technical Specifications
The following table outlines the primary electronic and mechanical characteristics of the WAC-A1BA-R:
| Feature | Specification |
| :--- | :--- |
| **Component Type** | Right-Angle SMT Header |
| **Number of Positions** | Variable (typically specific to the series) |
| **Pitch (Spacing)** | 2.0 mm / 2.5 mm (Series dependent) |
| **Current Rating** | ~2A to 3A AC/DC |
| **Voltage Rating** | 100V - 250V AC/DC |
| **Contact Resistance** | 20 mΩ Max |
| **Insulation Resistance** | 1000 MΩ Min |
| **Dielectric Strength** | 800V AC/minute |
---
### 2. Key Electronic Features
The WAC-A1BA-R is designed with specific electronic protections to ensure stability in harsh environments:
* **Gold/Tin Plating:** The pins are usually plated with tin or selective gold to prevent oxidation and ensure low contact resistance over long periods.
* **SMT (Surface Mount Technology):** It is designed to be soldered directly onto the surface of a PCB, allowing for high-density component placement.
* **Heat Resistance:** The housing is typically made of high-temperature thermoplastic (LCP or Nylon 9T) to withstand **Reflow Soldering** temperatures (up to 260°C).
* **Polarization/Keying:** The plastic housing includes a physical "key" to prevent the mating cable from being plugged in backwards, preventing short circuits.
---
### 3. Structural Design
The suffix nomenclature (like **-R**) usually denotes specific mechanical orientations:
1. **Right-Angle Orientation (-R):** The pins exit the connector at a 90-degree angle relative to the PCB. This is used to save vertical space ("Low Profile") or to allow side-entry cabling.
2. **Locking Mechanism:** Most headers in this series feature a "Friction Lock" or a "Positive Lock" to ensure the connector does not vibrate loose in automotive applications.
3. **Solder Tabs:** Often includes side metal tabs (Solder Nails) to increase the mechanical strength of the part on the PCB, preventing the connector from being ripped off during manual unplugging.
---
### 4. Typical Applications
* **Automotive:** Infotainment systems, dashboard clusters, and ECU sensors.
* **Consumer Electronics:** LCD TV backlighting and internal power modules.
* **Industrial:** PLC controllers and robotics interface boards.
- ⤷
What is the exact pin count for the version you are using?
- ⤷ Does your application require high-vibration resistance (Automotive grade)?
- ⤷ Are you looking for the matching female housing part number?