Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  

  • WAC-A3AD-R

  • AI
    The **WAC-A3AD-R** is a specific electronic component, typically categorized as a **Wireless Antenna Connector** or a **Radio Frequency (RF) adapter/interface module**, often associated with industrial automation or communication hardware (such as those from Mitsubishi Electric or specialized RF manufacturers). Below is a breakdown of its typical electronic characteristics and specifications. --- ## 1. General Specifications | Feature | Details | | :--- | :--- | | **Category** | RF Component / Wireless Interface | | **Connector Type** | Usually SMA or Reverse Polarity SMA (RP-SMA) | | **Impedance** | 50 Ohms (Standard for RF) | | **Frequency Range** | Typically 2.4 GHz to 5.8 GHz (WiFi/ISM bands) | | **Material** | Brass/Nickel plating with Gold-plated contacts | --- ## 2. Key Electronic Parts & Construction The WAC-A3AD-R consists of several critical sub-components that ensure signal integrity: ### A. The Signal Conductor (Center Pin) * **Material:** Usually made of Beryllium Copper or Brass. * **Plating:** Gold plating is used to enhance conductivity and prevent oxidation, which is vital for maintaining low insertion loss in high-frequency circuits. ### B. Dielectric Insulator * **Material:** PTFE (Teflon). * **Function:** Provides high insulation resistance and maintains the 50-ohm characteristic impedance between the inner conductor and the outer shield. ### C. Shielding (Outer Shell) * **Material:** Stainless steel or Nickel-plated brass. * **Function:** Acts as the ground reference and prevents Electromagnetic Interference (EMI) from leaking out or entering the signal path. --- ## 3. Electrical Performance Parameters To understand how this part functions in a circuit, we look at three main metrics: 1. **V.S.W.R (Voltage Standing Wave Ratio):** Usually rated $< 1.5:1$. This indicates how much power is reflected back to the source. Lower is better. 2. **Insertion Loss:** Typically measured in Decibels (dB). It represents the signal power lost as it passes through the connector. 3. **Dielectric Withstanding Voltage:** The maximum voltage the insulator can handle before sparking/failure (usually around 500V - 1000V RMS). --- ## 4. Usage Context The "R" suffix in **WAC-A3AD-R** often denotes **Reverse Polarity** or a specific **RoHS compliance** revision. These are commonly used in: * Industrial Access Points (WLAN). * PLC (Programmable Logic Controller) wireless modules. * Antenna extension cables for M2M (Machine to Machine) communication.
    ✨ Follow-up Questions
    • ⤷ What is the difference between SMA and RP-SMA in the context of this part?
    • ⤷ How does the 'R' suffix change the electrical compatibility?
    • ⤷ What are the common failure modes for these RF connectors?