YB216CWCPG01-5C-JS
AI

The **YB216CWCPG01-5C-JS** is a high-quality, panel-mount pushbutton switch manufactured by **NKK Switches**. It belongs to the YB2 series, which is known for its tamper-resistant design and sleek, flush-mount appearance.
---
### 1. Technical Specifications
| Feature | Specification |
| :--- | :--- |
| **Circuit** | DPDT (Double Pole Double Throw) |
| **Switch Function** | On-On (Maintained/Latching) |
| **Current Rating** | 3A @ 125V AC / 3A @ 250V AC / 0.4VA @ 28V AC/DC |
| **Illumination Type** | LED (Full Face) |
| **LED Color** | Red |
| **Cap Color/Material** | Clear Lens with White Filter / Polycarbonate |
| **Termination Style** | Solder Lug |
| **Mounting Type** | Panel Mount, Front (16mm hole) |
| **Ingress Protection** | IP65 (Dust tight and Water resistant) |
---
### 2. Electronic Component Breakdown
#### A. Circuitry: DPDT (Double Pole Double Throw)
This part features two separate circuits controlled by a single actuator. Each "pole" can switch between two different output paths. This is ideal for controlling two separate functions simultaneously (e.g., turning on a motor and a status light at the same time).
#### B. Switching Logic: Maintained (Latching)
Unlike a momentary switch (which springs back immediately), this is a **maintained** switch. When you press it, it stays in the down/on position until you press it again to release it.
#### C. LED Illumination (-5C-JS)
* **-5C:** Represents the Red LED specification.
* **-JS:** Refers to the specific silver-colored, rectangular/square cap style with a metallic finish bezel.
* The LED is independent of the switch circuit, meaning it can be wired to stay on constantly or only light up when the switch is activated.
#### D. Environmental Sealing
The "W" in the part number indicates a **waterproof/splashproof** construction. It utilizes an internal o-ring and a silicone rubber seal to achieve an **IP65 rating**, making it suitable for industrial control panels exposed to moisture or dust.
---
### 3. Dimensional Data
* **Bushing Diameter:** 16mm (Standard industrial cutout).
* **Body Style:** "CW" (Customizable/Compact White body) with a metallic bezel for a flush-to-panel look.
---
- ⤷
What is the voltage drop and current requirement for the Red LED in this switch?
- ⤷ How does a DPDT circuit differ from a SPDT circuit in practical applications?
- ⤷ What are the recommended soldering temperatures for the solder lug terminals?