| Electronic Components Datasheet Search |
|
The question interval is too short.
Please try again in a few seconds.
Hello, Please ask a question about SFH2430 Datasheet
# Example questions:
➢ What is the typical capacitance value for the sfh 2430 at a reverse voltage of 10v and a frequency of 1 mhz?
➢ Under what conditions are components expressly authorized for use in life-support devices or systems?
➢ What is the recommended preconditioning level for soldering components according to the document?
1. Component Overview:
️· Type: Opto-semiconductor (likely a photodiode or photosensor)
️· Manufacturer: OSRAM Opto Semiconductors GmbH
️· Datasheet Date: April 2003 (This may be outdated, it's crucial to check for newer versions on OSRAM's website).
️· Website: [www.osram-os.com](http://www.osram-os.com)
2. Electrical and Optical Characteristics (Key Values - Full datasheet would provide more detail):
️· Dark Current (I<sub>R</sub>): Dependent on reverse voltage (V<sub>R</sub>). The datasheet includes a graph showing its relationship. The values are quite low in general.
️· Capacitance (C): Dependent on reverse voltage. A graph shows the relationship.
️· Response Characteristics: The datasheet describes directionality and other response characteristics.
️· Spectral Response: The SFH 2430 has a defined sensitivity to light at various wavelengths (this would be fully detailed in the datasheet).
️· Package Dimensions: There's a diagram provided showing the package dimensions.
️· Soldering Conditions: Specifies preconditioning according to JEDEC Level 4, and provides a reflow soldering profile conforming to J-STD-020C.
3. Graphs and Diagrams (Summarized):
️· Dark Current vs. Reverse Voltage: Shows the relationship between dark current and reverse voltage, crucial for understanding behavior.
️· Capacitance vs. Reverse Voltage: Illustrates how capacitance changes with reverse voltage.
️· Directional Characteristics (S vs. Angle): Graphs showing how the sensitivity to light changes depending on the incident angle.
️· Package Outlines: A dimensional drawing of the package itself.
4. Important Notes & Disclaimers:
️· Datasheet is Informational: The information is a description of the component and should not be taken as guaranteed characteristics.
️· Design Changes Reserved: OSRAM reserves the right to change the design.
️· Dangerous Substances: The component may contain dangerous substances; contact sales for details.
️· Life Support Devices: Use in life-support devices requires express written approval from OSRAM.
️· Recycling: Encourages recycling of packing materials.
️· Liability: OSRAM's liability is limited, as outlined in the terms of delivery.
To fully understand this datasheet, you would need to:
️· Consult a full, current datasheet: This provided document appears to be a partial version. Check OSRAM's website for the most recent version.
️· Understand the technical terminology: Familiarize yourself with terms like "photodiode," "reverse voltage," "spectral response," and "reflow soldering."
️· Review the complete graphs and tables: The provided summaries only touch on the data provided in the graphs.
Please note: This summary is based on the text available. Always refer to the official datasheet from OSRAM for accurate and comprehensive information.
1. Component Overview:
️· Type: Opto-semiconductor (likely a photodiode or photosensor)
️· Manufacturer: OSRAM Opto Semiconductors GmbH
️· Datasheet Date: April 2003 (This may be outdated, it's crucial to check for newer versions on OSRAM's website).
️· Website: [www.osram-os.com](http://www.osram-os.com)
2. Electrical and Optical Characteristics (Key Values - Full datasheet would provide more detail):
️· Dark Current (I<sub>R</sub>): Dependent on reverse voltage (V<sub>R</sub>). The datasheet includes a graph showing its relationship. The values are quite low in general.
️· Capacitance (C): Dependent on reverse voltage. A graph shows the relationship.
️· Response Characteristics: The datasheet describes directionality and other response characteristics.
️· Spectral Response: The SFH 2430 has a defined sensitivity to light at various wavelengths (this would be fully detailed in the datasheet).
️· Package Dimensions: There's a diagram provided showing the package dimensions.
️· Soldering Conditions: Specifies preconditioning according to JEDEC Level 4, and provides a reflow soldering profile conforming to J-STD-020C.
3. Graphs and Diagrams (Summarized):
️· Dark Current vs. Reverse Voltage: Shows the relationship between dark current and reverse voltage, crucial for understanding behavior.
️· Capacitance vs. Reverse Voltage: Illustrates how capacitance changes with reverse voltage.
️· Directional Characteristics (S vs. Angle): Graphs showing how the sensitivity to light changes depending on the incident angle.
️· Package Outlines: A dimensional drawing of the package itself.
4. Important Notes & Disclaimers:
️· Datasheet is Informational: The information is a description of the component and should not be taken as guaranteed characteristics.
️· Design Changes Reserved: OSRAM reserves the right to change the design.
️· Dangerous Substances: The component may contain dangerous substances; contact sales for details.
️· Life Support Devices: Use in life-support devices requires express written approval from OSRAM.
️· Recycling: Encourages recycling of packing materials.
️· Liability: OSRAM's liability is limited, as outlined in the terms of delivery.
To fully understand this datasheet, you would need to:
️· Consult a full, current datasheet: This provided document appears to be a partial version. Check OSRAM's website for the most recent version.
️· Understand the technical terminology: Familiarize yourself with terms like "photodiode," "reverse voltage," "spectral response," and "reflow soldering."
️· Review the complete graphs and tables: The provided summaries only touch on the data provided in the graphs.
Please note: This summary is based on the text available. Always refer to the official datasheet from OSRAM for accurate and comprehensive information.
| Part No. | SFH2430 |
| Manufacturer | OSRAM |
| Size | 204 Kbytes |
| Pages | 6 pages |
| Description | Silicon Photodiode with V貫 Characteristics |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |