General Description
FSBB30CH60F is a Motion SPM® 3 module providing a
fully-featured, high-performance inverter output stag e
for AC Induction, BLDC, and PMSM motors. These modules
integrate optimized gate drive of the built-in IGBT s
to minimize EMI and losses, while also providing multiple
on-module protection features including under-voltage
lockouts, over-current shutdown, and fault reporting.
The built-in, high-speed HVIC requires only a single supply
voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's internal IGBTs.
Separate negative IGBT terminals are available for each
phase to support the widest variety of control algorithms.

Features
• UL Certified No. E209204 (UL1557)
• 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection
• Built-In Thermal Shutdown Function
• Low-Loss, Short-Circuit Rated IGBTs
• Very Low Thermal Resistance Using AlN DBC Substrate
• Dedicated Vs Pins Simplify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Isolation Rating: 2500 Vrms / min.

Applications
• Motion Control - Home Appliance / Industrial Motor