Your Benefits
• Complete unit consisting of the probe and electronic insert:
– simple mounting
– no calibration on start-up
• Active build-up compensation
– accurate switch point
– high operational safety
• Mechanically rugged
– no wearing parts
– long operating life
– no maintenance
• The rope probe of the Minicap FTC262 can be shortened
– optimum matching to the measuring point
– less stocks required

Application
The Minicap is designed for point level detection in light bulk solids with a grain size
up to max. 30 mm (1.18 in) and a dielectric constant εr ≥1.6
e.g. grain products, flour, milk powder, animal feed, cement, chalk or gypsum.
Versions:
• Minicap FTC260: with rod probe for bulk solids and liquids
• Minicap FTC262: with rope probe up to 6 m (20 ft); for bulk solids
• Relay output (potential-free change-over contact / SPDT) with AC or DC power
• PNP output with three-wire DC power