Technical features
Medium:
Compressed air only
Maximum supply pressure:
20 bar (290 psi)
Outlet pressure ranges:
0.3 ...10 bar (4 ... 145 psi),
0.3 ... 4 bar (4 ... 58 psi) optional
0.7...17bar (10...247psi) optional
Filter element:
5 μm & 40 μm
Port size:
G3/8, G1/2, G3/4,
3/8 PTF, 1/2 PTF, 3/4 PTF
Gauge:
Gauge port as standard
( Rc 1/8 or 1/8 PTF)
Integrated gauge as option
Flow:
103 dm³/s at port size: ½”,
Inlet pressure 10 bar (145 psi),
6.3 bar (91 psi) set pressure and
a Δp: 1 bar (14.5 psi) drop from
set.
Filter element: 5μm & 40μm
Diaphragm Type:
Relieving & Non-Relieving
Drain:
Manual or automatic
Automatic drain operating
conditions (float operated):
Bowl pressure required to
close drain: > 0.35 bar (5 psi)
Bowl pressure required to
open drain: ≤ 0.2 bar (2.9 psi)
Minimum air flow required to
close drain: 1 dm3/s (2 scfm)
Ambient/Media temperature:
Unit with gauge port without
integrated gauge :
-40 ... +80°C (-40 ... +176°F)
Air supply must be dry enough to
avoid ice formation at temperatures
below +2°C (+35°F).
Atex:
Filter/regulators HB84 are in
conformity with Atex 2014/34/EU
II 2 GD
Ex h IIC T6 Gb
EX h IIIC T85°C Db
Materials:
Body: Die cast aluminium
Body covers:
ABS (Magnum 3904)
Bonnet: Die cast aluminium
Valve: Brass and
Low temperature Nitrile
Metal Bowl: Die cast Aluminium
Filter element: sintered Polypropylene
Diaphragm: Low temperature
Silicone, polyester reinforced
Lower spring rest and
diaphragm retainer:
Aluminium
Bowl O-ring:
Low temperature Nitrile
Elastomers:
Low temperature Nitrile