1. ALL ITEMS SHIPPED NON-ASSEMBLED.
2. SEALED TO IP67 RATING.
3. ASSEMBLY INSTRUCTIONS:
- CUT RECOMMENDED MOUNTING HOLE INTO PANEL
- INSERT SEAL ONTO LIGHT PIPE AND PLACE INTO MOUNTING HOLE
- PLACE WASHER ON OTHER SIDE OF PANEL
- PLACE FLAT SIDE OF NUT AGAINST WASHER AND TIGHTEN UNTIL THERE IS RESISTANCE
- HOLD HEAD OF LIGHT PIPE AND TIGHTEN NUT WITH TORQUE WRENCH 6-7 IN-OZ
- DO NOT OVERTIGHTEN OR APPLY FORCE TO LIGHT PIPE