PRODUCT HIGHLIGHTS
• FULL COMPLIANCE WITH MIL-STD-1399 (SECTION 300B)
• 3U RACKMOUNT
• 2.5KW/3KVA UPS
• LONG HOLDUP TIME 2 HR @ 1KW/ 1 HR @ 2KW

M362-4 MAIN FEATURES:
• 19”, 3U Rack-mount, 18.25” deep with recessed I/O connectors to fit in shallow racks.
• Full Compliance with MIL-STD-1399 (Section 300B), Type-I Power (115VAC/60Hz, Delta).
• 115/230VAC Input selectable (output, including in By-pass, is always 115VAC).
• Internal Input Isolation Transformer.
• Accepts up to four external Battery Packs (at least one external Battery Pack must be used).
• Long Holdup time: over 2 hours at 1KW and one hour at 2KW (with four M333-4 Battery Packs).
• Real sine-wave 115VAC/60Hz output, synthesized from a crystal oscillator.
• Very low Input Current Harmonic and high Power factor (MIL-STD-1399-300B compliant).
• Inrush Current limiting (MIL-STD-1399-300B compliant).
• Very low input-to-chassis capacitance (MIL-STD-1399-300B and MIL-STD-461E compliant).
• Full galvanic isolation between Input, Chassis GND and Output.
• 1000V / 50μs spike capability (MIL-STD-1399-300B compliant).
• Complies with MIL-STD-461E.
• Complies with MIL-S-901D (Grade A, Class I &2) and MIL-STD-167-1 (Type I).
• Remote Panel ON/OFF capability.
• By-pass mode, via internal Power Conditioner, Isolation Transformer and Relays.
• RS-232 or Ethernet SNMP v1, v2 or v3 Control and Monitor.
• J-STD-001B and IPC-610A Class-3 Workmanship.
• Conformal Coating of PWBs per MIL-I-46058C and IPC-CC-830.