Features
■Threaded barrel, M12 x 1
■Stainless steel, 1.4301
■DC 3-wire, 10…30 VDC
■NC/NO parametrizable with teach adapter
VB2‐SP1
■M12 x 1 male connector
Functional principle
The weld sensors are available in different
versions, with different signal intensities
and diameters. Ferromagnetic parts which
differ strongly in their material properties and
diameters can thus be detected. A component
to be detected must be located within the socalled optimal sensitive area in order to be
detected.
This optimal sensitive area has a width of 0.5
mm and is laser-engraved on the tip of the
probe, 11. 9 mm above of the M12 thread.