The module rack MT16-2G/MSA consists of a
backplane and the actual rack system. It can
accommodate 2 gateways, 2 power supply
units as well as 16 I/O modules. Up to 128 binary inputs/outputs or 64 analog inputs/outputs resp. a mix of both can be connected to
it.
All modules can be plugged and unplugged
under power without interrupting the data
transmission. The same applies to redundant
gateways and power supply modules.
The module rack is designed in a combined
protection rating of Ex e and Ex i and can
therefore be used in zone 1.

The power supply of modules on the backplane is limited to prevent sparking. This allows you to pull and plug modules in powered
state with excom® mounted in zone 1.
The rack system is made of continuously cast
aluminum. This ensures increased stability
and shielding. The module rack is suited for
switch cabinet and 19" rack mounting.
The module rack MT16-2G/MSA is especially
adapted to the requirements for maritime applications. It is certified acc. to the ship classes GL, DNV, BV and LR

■ Module rack for max. 16 I/O modules, 2
gateways and 2 power supply modules
■ The terminals for the signal connection level are available as accessories
■ Module rack approved for maritime applications (certification according to GL, DNV,
BV and LR)