The cabinet guard IM12-CCM03-MTIS-3TIOLC/24V/CC monitors preset environmental
limits inside the control cabinet. The environmental conditions are detected by an integrated humidity or temperature sensor, a brightness sensor and a triangulation sensor that
detects an incorrectly closed cabinet door.
When exceeding or falling below the set limit
values, an error message appears on the LED
display or is reported via the switching outputs
and the IO link interface to the host control
system.
The device is supplied with 24 VDC
The teaching is done manually on the device;
extended parameterization is carried out via
the IO-Link interface.

The device is equipped with 8 cage clamp terminals for connecting the power supply and
switching outputs and can be mounted on a
DIN rail acc. to EN 60715.
Furthermore, the device has 4 front-mounted
LEDs to display the operating status (green),
the error message (red) and the states of the
switching outputs (2 × yellow).
The device is equipped with removable
spring-type terminals

■ Two potential-free contacts
■ Temperature detection
■ Moisture detection
■ Detection of distance to cabinet door
■ IO-Link parameterizable
■ Connection of two devices via CAN bus
■ Galvanic isolation of outputs (A1/A2)
■ Removable cage clamp terminals