Features

Built-in re-timer
- Integrated re-timer for USB 3.1 up to Gen 2 @ 10Gbps
- Loss compensation to recover up to 23dB channel loss

Integrated mux
- Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
- Mux control input through I2C commands from external I2C master (or, optionally through FLIP/OP_MODE pins)

Reference clock for re-timers
- Utilizes a 24MHz crystal or 1.05V swing singleended clock source

Serial and debug interfaces
- I2C Slave interface, up to 1MHz, for mux and retimer configuration
- DCI debug interface support

Industry standard compatibility
- USB 3.1 specification, Appendix E
- USB Type-C r1.2 specification
- Intel USB 3.1 Repeater and Active Switch specification

Low-power design
- Analog power supply at 1.8V
- Dedicated 3.3V power for DCI interface
- Dedicated supply power pin for I/O power at 1.8V

Packages
- BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
- QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
- QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch

Commercial temperature range of 0C to 70C

Applications
Notebooks, desktops, 2-in-1s, and docking stations