Function, Pinout, and Drive Compatible
With FCT, F Logic, and AM29520
Reduced VOH (Typically = 3.3 V) Version of
Equivalent FCT Functions
Edge-Rate Control Circuitry for
Significantly Improved Noise
Characteristics
Ioff Supports Partial-Power-Down Mode
Operation
Matched Rise and Fall Times
Fully Compatible With TTL Input and
Output Logic Levels
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
Single- and Dual-Pipeline Operation Modes
Multiplexed Data Inputs and Outputs
CY29FCT520T
– 64-mA Output Sink Current
32-mA Output Source Current
CY29FCT520ATDMB, CY29FCT520BTDMB
– 32-mA Output Sink Current
12-mA Output Source Current
3-State Outputs

description
The CY29FCT520T is a multilevel 8-bit-wide pipeline register. The device consists of four registers, A1, A2, B1,
and B2, which are configured by the instruction inputs I0, I1 as a single four-level pipeline or as two two-level
pipelines. The contents of any register can be read at the multiplexed output at any time by using the
multiplex-selection controls (S0 and S1).
The pipeline registers are positive-edge triggered, and data is shifted by the rising edge of the clock input.
Instruction I = 0 selects the four-level pipeline mode. Instruction I = 1 selects the two-level B pipeline, while I = 2
selects the two-level A pipeline. I = 3 is the hold instruction; no shifting is performed by the clock in this mode.
In the two-level operation mode, data is shifted from level 1 to level 2 and new data is loaded into level 1.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.