DESCRIPTION
The SN74LV8153 is a serial-to-parallel data converter. It
accepts serial input data and outputs 8-bit parallel data.
The automatic data-rate detection feature of the
SN74LV8153 eliminates the need for an external oscillator
and helps with cost and board real-estate savings.
The OUTSEL pin is used to choose between open
collector and push-pull outputs. The open-collector option
is suitable when this device is used in applications such as
LED interface, where high drive current is required. SOUT
is the output that acknowledges reception of the serial
data.
To ensure the high-impedance state during power up or
power down, OE should be tied to VCC1 through a pullup
resistor; the minimum value of the resistor is determined
by the current-sinking capability of the driver.

FEATURES
Single-Wire Serial Data Input
Compatible With UART Serial-Data Format
Up to Eight Devices (64-Bit Parallel) Can
Share the Same Bus by Using Different
Combinations of A0, A1, A2
Up to 40 mA Current Drive in Open-Collector
Mode for Driving LEDs
Outputs Can be Configured as
Open-Collector or Push-Pull
Internal Oscillator and Counter for
Automatic Data-Rate Detection
Output Levels Are Referenced to VCC2 and
Can Be Configured From 3 V to 12 V
Latch-Up Performance Exceeds 250 mA Per
JESD 17
ESD Protection Exceeds JESD 22
− 2000-V Human-Body Model (A114-A)
− 1000-V Charged-Device Model (C101)