FEATURES
► 2.2 MHz small signal, −3 dB bandwidth
► In-package Trim Core (DigiTrim™)
► Precision without chopping and/or autozero
► Typical ±0.21 µV/°C offset drift
► Maximum ±200 µV voltage-offset over temperature range
► Typical DC CMRR: 142 dB
► Typical AC CMRR at 50 kHz: 96 dB
► Wide common-mode input voltage range
► −2 V to +70 V, continuous operation
► −20 V to +85 V, continuous survival
► Initial gain: 20 V/V
► Wide operating temperature range: −40°C to +125°C
► Bidirectional operation
► 2.9 V to 5.5 V power-supply operating range
► Available in 8-lead, SOIC_N package and 8-lead, MSOP package
► AEC-Q100 qualified for automotive applications

APPLICATIONS
► In-phase or High-side current sensing in
► Motor control in BLDC motors, Low-inductance motors
► Bidirectional 48 V to 12 V DC-DC converters
► Solenoid controls
► Power rail monitoring
► Low-side current sensing

GENERAL DESCRIPTION
The AD8410A1
is a high voltage, high bandwidth current-sense
amplifier. The device features an initial gain of 20 V/V, with a 2.2
MHz bandwidth with a maximum ±0.13% gain error over the entire
temperature range. The buffered output voltage directly interfaces
with any typical converter. The AD8410A has a minimum DC
common-mode rejection ratio (CMRR) of 123 dB from −2 V to
+70 V. The AD8410A performs bidirectional current measurements
across a shunt resistor in a variety of industrial and automotive
applications.
The AD8410A offers breakthrough performance throughout the
−40°C to +125°C temperature range. The device features an
in-package trim core, which leads to a typical offset drift of
±0.21 µV/°C (based on Box Method, see Figure 56) throughout
the operating temperature range and the common-mode voltage
range without the need for chopping and autozero clocks (which
could lead to intermodulation in the application). The device includes circuitry to achieve a wide input common-mode range and
balanced input bias currents, regardless of input differential voltage
or common-mode voltage, and circuitry to achieve ultra-low CMRR
drift. The device also includes circuitry to enable output accuracy
in the presence of pulse-width modulation (PWM) type input common-mode voltages. The AD8410A is available in 8-lead, SOIC_N
package and 8-lead, MSOP package.