FEATURES
Driver
3-level driver with high-Z mode and built-in clamps
Precision trimmed output resistance
Low leakage mode (typically <10 nA)
Voltage range: −2.0 V to +6.0 V
1.0 ns minimum pulse width, 1 V terminated
Comparator
Window and differential comparator
>1 GHz input equivalent bandwidth
Load
±12 mA maximum current capability
Per pin PMU
Force voltage range: −2.0 V to +6.0 V
5 current ranges: 25 mA, 2 mA, 200 μA, 20 μA, and 2 μA
Levels
14-bit DAC for DCL levels
Typically <±5 mV INL (calibrated)
16-bit DAC for PMU levels
Typically <±1.5 mV INL (calibrated) linearity in FV mode
HVOUT output buffer
0 V to 13.5 V output range
Packages
84-ball, 9 mm × 9 mm, flip-chip BGA
100-lead TQFP_EP
1.7 W per channel with no load
APPLICATIONS
Automatic test equipment
Semiconductor test systems
Board test systems
Instrumentation and characterization equipment

GENERAL DESCRIPTION
The ADATE302-02 is a complete, single-chip solution that
performs the pin electronic functions of the driver, the comparator, and the active load (DCL), per pin PMU, and dc levels for
ATE applications. The device also contains an HVOUT driver
with a VHH buffer capable of generating up to 13.5 V.
The driver features three active states: data high mode, data low
mode, and term mode, as well as an inhibit state. The inhibit
state, in conjunction with the integrated dynamic clamp, facilitates
the implementation of a high speed active termination. The output
voltage range is −2.0 V to +6.0 V to accommodate a wide
variety of test devices.
The ADATE302-02 can be used as either a dual single-ended
drive/receive channel or a single differential drive/receive
channel. Each channel of the ADATE302-02 features a high
speed window comparator for functional testing as well as a per
pin PMU with FV or FI and MV or MI functions. All necessary
dc levels for DCL functions are generated by on-chip 14-bit
DACs. The per pin PMU features an on-chip 16-bit DAC for
high accuracy and contains integrated range resistors to
minimize external component counts.
The ADATE302-02 uses a serial bus to program all functional
blocks and has an on-board temperature sensor for monitoring
the device temperature.