Features
 AEC-Q100 qualified
 General
 Double channel smart high-side driver with MultiSense analog feedback
 Very low standby current
 Compatible with 3 V and 5 V CMOS outputs
 MultiSense diagnostic functions
 Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
 Overload and short to ground (power limitation) indication
 Thermal shutdown indication
 OFF-state open-load detection
 Output short to VCC detection
 Sense enable/disable
 Protections
 Undervoltage shutdown
 Overvoltage clamp
 Load current limitation
 Self limiting of fast thermal transients
 Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
 Loss of ground and loss of VCC
 Reverse battery with self switch of the PowerMOS
 Electrostatic discharge protection