|
1 Features
• FMCW transceiver
– Integrated 4 receivers and 3 transmitters
Antennas-On-Package (AOP)
– Integrated PLL, transmitter, receiver, Baseband,
and ADC
– 60 to 64GHz coverage with 4GHz continuous
bandwidth
– Supports 6-bit phase shifter for TX Beam
forming
– Ultra-accurate chirp engine based on fractional-
N PLL
• Built-in calibration and self-test
– Arm® Cortex®-R4F-based radio control system
– Built-in firmware (ROM)
– Self-calibrating system across process and
temperature
– Embedded self-monitoring with no host
processor involvement on Functional Safety-
Compliant devices
• C674x DSP for advanced signal processing
• Memory compression
• Hardware accelerator for FFT, filtering, and CFAR
processing
• Arm-R4F microcontroller for object detection, and
interface control
– Supports autonomous mode (loading user
application from QSPI flash memory)
• Internal memory with ECC
– 1.75MB, divided into MSS program RAM
(512KB), MSS data RAM (192KB), DSP L1
RAM (64KB) and L2 RAM (256KB), and L3
radar data cube RAM (768KB)
– Technical reference manual includes allowed
size modifications
• Device Security (on select part numbers)
– Secure authenticated and encrypted boot
support
– Customer programmable root keys, symmetric
keys (256 bit), Asymmetric keys (up to RSA-2K)
with Key revocation capability
– Crypto software accelerators - PKA , AES (up
to 256 bit), SHA (up to 256 bit), TRNG/DRGB
• Other interfaces available to user application
– Up to 6 ADC channels (low sample rate
monitoring)
– Up to 2 SPI ports
– Up to 2 UARTs
– 1 CAN-FD interface
– I2C
– GPIOs
– 2 lane LVDS interface for raw ADC data and
debug instrumentation
• Functional Safety-Compliant
– Developed for functional safety applications
– Documentation available to aid IEC 61508
functional safety system design up to SIL 3
– Hardware integrity up to SIL-2
– Safety-related certification
• IEC 61508 certified upto SIL 2 by TUV SUD
• Power management
– Built-in LDO network for enhanced PSRR
– I/Os support dual voltage 3.3V/1.8V
• Clock source
– 40.0MHz crystal with internal oscillator
– Supports external oscillator at 40MHz
– Supports externally driven clock (square/sine)
at 40MHz
• Easy hardware design
– 0.8mm pitch, 180-pin 15mm × 15mm FCBGA
package (ALP) for easy assembly and low-cost
PCB design
– Small solution size
• Operating conditions
– Junction temp range: –40°C to 105°C
2 Applications
• Industrial sensor for measuring range, velocity, and
angle
• Building automation
• Displacement sensing
• Gesture
• Robotics
• Traffic monitoring
• Level Sensing
• Security and surveillance
• Factory automation safety guards
• Occupancy detection / people tracking / people
counting
• Automated door & gate
• Motion detection
3 Description
The IWR6843AOP is an Antenna-on-Package (AOP) device that is an evolution within the single-chip radar
device family from Texas Instruments (TI). This device enables unprecedented levels of integration in an
extremely small form factor and is an ideal solution for low power, self-monitored, ultra-accurate radar systems
in the industrial space. Multiple variants are currently available including Functional Safety-Compliant devices
(SIL2) and non-functional safety devices.
It integrates a DSP subsystem, which contains TI's high-performance C674x DSP for the Radar Signal
processing. The device includes a BIST processor subsystem, which is responsible for radio configuration,
control, and calibration. Additionally, the device includes a user programmable Arm Cortex-R4F based for
automotive interfacing. The Hardware Accelerator block (HWA) can perform radar processing and can offload
the DSP in order to execute higher level algorithms. Simple programming model changes can enable a wide
variety of sensor applications with the possibility of dynamic reconfiguration for implementing a multimode
sensor. Additionally, the device is provided as a complete platform solution including reference hardware design,
software drivers, sample configurations, API guide, and user documentation.
|